For any kind of annotated element (type, method, constructor, package, etc.), an annotation pattern can be used to match against the set of annotations on the annotated element.An annotation pattern element has one of two basic forms:

These simple elements may be negated using !, and combined by simple concatentation. The pattern @Foo @Boo matches an annotated element that has both an annotation of type Foo and an annotation of type Boo.

Some examples of annotation patterns follow:

AspectJ 1.5 extends type patterns to allow an optional AnnotationPattern prefix.

  	  	TypePattern := SimpleTypePattern |
  	  	               '!' TypePattern |
  	  	               '(' AnnotationPattern? TypePattern ')'
  	  	               TypePattern '&&' TypePattern |
  	  	               TypePattern '||' TypePattern 
  	  	
  	  	SimpleTypePattern := DottedNamePattern '+'? '[]'*
  	  	
  		DottedNamePattern := FullyQualifiedName RestOfNamePattern? |
  		                     '*' NotStarNamePattern?
  		
  		RestOfNamePattern := '..' DottedNamePattern |
  		                     '*' NotStarNamePattern?
  		                     
  		NotStarNamePattern := FullyQualifiedName RestOfNamePattern? |
  		                      '..' DottedNamePattern               

  		FullyQualifiedName := JavaIdentifierCharacter+ ('.' JavaIdentifierCharacter+)*  				  		  		  		               									 				  		             
	

Note that in most cases when annotations are used as part of a type pattern, the parenthesis are required (as in (@Foo Hello+)). In some cases (such as a type pattern used within a within or handler pointcut expression), the parenthesis are optional:

        OptionalParensTypePattern := AnnotationPattern? TypePattern
      

The following examples illustrate the use of annotations in type patterns:

AspectJ 5 supports a set of "@" pointcut designators which can be used both to match based on the presence of an annotation at runtime, and to expose the annotation value as context in a pointcut or advice definition. These designators are @args, @this, @target, @within, @withincode, and @annotation

It is a compilation error to attempt to match on an annotation type that does not have runtime retention using @this, @target or @args. It is a compilation error to attempt to use any of these designators to expose an annotation value that does not have runtime retention.

The this(), target(), and args() pointcut designators allow matching based on the runtime type of an object, as opposed to the statically declared type. In AspectJ 5, these designators are supplemented with three new designators : @this() (read, "this annotation"), @target(), and @args().

Like their counterparts, these pointcut designators can be used both for join point matching, and to expose context. The format of these new designators is:

  	
  	    AtThis := '@this' '(' AnnotationOrIdentifer ')'
    
  	    AtTarget := '@target' '(' AnnotationOrIdentifier ')'
  	
  	    AnnotationOrIdentifier := FullyQualifiedName | Identifier
        
  	    AtArgs := '@args' '(' AnnotationsOrIdentifiersPattern ')'
        
  	    AnnotationsOrIdentifiersPattern :=
  	                      '..' (',' AnnotationsOrIdentifiersPatternAfterDotDot)? |
  	                      AnnotationOrIdentifier (',' AnnotationsOrIdentifiersPattern)* |
  	                      '*' (',' AnnotationsOrIdentifiersPattern)*
		                  
  	    AnnotationsOrIdentifiersPatternAfterDotDot := 
		                  AnnotationOrIdentifier (',' AnnotationsOrIdentifiersPatternAfterDotDot)* |
		                  '*' (',' AnnotationsOrIdentifiersPatternAfterDotDot)*
  	
	

The forms of @this() and @target() that take a single annotation name are analogous to their counterparts that take a single type name. They match at join points where the object bound to this (or target, respectively) has an annotation of the specified type. For example:

Annotations can be exposed as context in the body of advice by using the forms of @this(), @target() and @args() that use bound variables in the place of annotation names. For example:

  	pointcut callToClassifiedObject(Classified classificationInfo) :
  	    call(* *(..)) && @target(classificationInfo);

  	pointcut txRequiredMethod(Tx transactionAnnotation) :
  	    execution(* *(..)) && @this(transactionAnnotation) 
  	    && if(transactionAnnotation.policy() == TxPolicy.REQUIRED);
	

The @args pointcut designator behaves as its args counterpart, matching join points based on number and position of arguments, and supporting the * wildcard and at most one .. wildcard. An annotation at a given position in an @args expression indicates that the runtime type of the argument in that position at a join point must have an annotation of the indicated type. For example:

  	/**
  	 * matches any join point with at least one argument, and where the
  	 * type of the first argument has the @Classified annotation
  	 */
  	pointcut classifiedArgument() : @args(Classified,..);
  	
  	/**
  	 * matches any join point with three arguments, where the third
  	 * argument has an annotation of type @Untrusted.
  	 */
  	pointcut untrustedData(Untrusted untrustedDataSource) : 
  	    @args(*,*,untrustedDataSource);
	

In addition to accessing annotation information at runtime through context binding, access to AnnotatedElement information is also available reflectively with the body of advice through the thisJoinPoint, thisJoinPointStaticPart, and thisEnclosingJoinPointStaticPart variables. To access annotations on the arguments, or object bound to this or target at a join point you can use the following code fragments:

  	Annotation[] thisAnnotations = thisJoinPoint.getThis().getClass().getAnnotations();
  	Annotation[] targetAnnotations = thisJoinPoint.getTarget().getClass().getAnnotations();
  	Annotation[] firstParamAnnotations = thisJoinPoint.getArgs()[0].getClass().getAnnotations();
	

The @within and @withincode pointcut designators match any join point where the executing code is defined within a type (@within), or a method/constructor (@withincode) that has an annotation of the specified type. The form of these designators is:

  	
        AtWithin := '@within' '(' AnnotationOrIdentifier ')'
        AtWithinCode := '@withincode' '(' AnnotationOrIdentifier ')'        
    

Some examples of using these designators follow:

The @annotation pointcut designator matches any join point where the subject of the join point has an annotation of the given type. Like the other @pcds, it can also be used for context exposure.

  	
        AtAnnotation := '@annotation' '(' AnnotationOrIdentifier ')'
    

The subject of a join point is defined in the table in chapter one of this guide.

Access to annotation information on members at a matched join point is also available through the getSignature method of the JoinPoint and JoinPoint.StaticPart interfaces. The Signature interfaces are extended with additional operations that provide access to the java.lang.reflect Method, Field and Constructor objects on which annnotations can be queried. The following fragment illustrates an example use of this interface to access annotation information.

  	Signature sig = thisJoinPointStaticPart.getSignature();
  	AnnotatedElement declaringTypeAnnotationInfo = sig.getDeclaringType();
  	if (sig instanceof MethodSignature) {
  	  // this must be a call or execution join point
  	  Method method = ((MethodSignature)sig).getMethod();
  	}
	

Note again that it would be nicer to add the method getAnnotationInfo directly to MemberSignature, but this would once more couple the runtime library to Java 5.

The @this,@target and @args pointcut designators can only be used to match against annotations that have runtime retention. The @within, @withincode and @annotation pointcut designators can only be used to match against annotations that have at least class-file retention, and if used in the binding form the annotation must have runtime retention.

Matching on package annotations is not supported in AspectJ. Support for this capability may be considered in a future release.

Parameter annotation matching is being added in AspectJ1.6. Initially only matching is supported but binding will be implemented at some point. Whether the annotation specified in a pointcut should be considered to be an annotation on the parameter type or an annotation on the parameter itself is determined through the use of parentheses around the parameter type. Consider the following:

    @SomeAnnotation
    class AnnotatedType {}

    class C {
      public void foo(AnnotatedType a) {}
      public void goo(@SomeAnnotation String s) {}
    }
    
	

The method foo has a parameter of an annotated type, and can be matched by this pointcut:

    pointcut p(): execution(* *(@SomeAnnotation *));
	

When there is a single annotation specified like this, it is considered to be part of the type pattern in the match against the parameter: 'a parameter of any type that has the annotation @SomeAnnotation'.

To match the parameter annotation case, the method goo, this is the pointcut:

    pointcut p(): execution(* *(@SomeAnnotation (*)));
	

The use of parentheses around the wildcard is effectively indicating that the annotation should be considered separately to the type pattern for the parameter type: 'a parameter of any type that has a parameter annotation of @SomeAnnotation'.

To match when there is a parameter annotation and an annotation on the type as well:

      pointcut p(): execution(* *(@SomeAnnotation (@SomeOtherAnnotation *)));
	

The parentheses are grouping @SomeOtherAnnotation with the * to form the type pattern for the parameter, then the type @SomeAnnotation will be treated as a parameter annotation pattern.

According to the Java 5 specification, non-type annotations are not inherited, and annotations on types are only inherited if they have the @Inherited meta-annotation. Given the following program:

  	class C1 {
  	  @SomeAnnotation
  	  public void aMethod() {...}
  	}
  	
  	class C2 extends C1 {
  	  public void aMethod() {...}
  	}
  	
  	class Main {
  	  public static void main(String[] args) {
  	    C1 c1 = new C1();
  	    C2 c2 = new C2();
  	    c1.aMethod();
  	    c2.aMethod();
  	  }
  	}
  	
  	aspect X {
  	
  	  pointcut annotatedC2MethodCall() : 
  	    call(@SomeAnnotation * C2.aMethod());
  	
  	  pointcut annotatedMethodCall() :
  	    call(@SomeAnnotation * aMethod());
  	}
	

The pointcut annotatedC2MethodCall will not match anything since the definition of aMethod in C2 does not have the annotation.

The pointcut annotatedMethodCall matches c1.aMethod() but not c2.aMethod(). The call to c2.aMethod is not matched because join point matching for modifiers (the visibility modifiers, annotations, and throws clause) is based on the subject of the join point (the method actually being called).

The if pointcut designator can be used to write pointcuts that match based on the values annotation members. For example:

  	pointcut txRequiredMethod(Tx transactionAnnotation) :
  	    execution(* *(..)) && @this(transactionAnnotation) 
  	    && if(transactionAnnotation.policy() == TxPolicy.REQUIRED);