Release 3.4.1
Last revised Sept 25, 2008
This software is OSI Certified Open Source Software.
OSI Certified is a certification mark of the Open Source Initiative.
1. Target Operating Environments
2. Compatibility with Previous Releases
3. Known Issues
4. Running Eclipse
5. Upgrading a Workspace from a Previous Release
6. Interoperability with Previous Releases
7. Defects Fixed since Previous Release
In order to remain current, each Eclipse release targets reasonably current operating environments.
Most of the Eclipse SDK is "pure" Java code and has no direct dependence on the underlying operating system. The chief dependence is therefore on the Java Platform itself. Portions of the Eclipse SDK (including the RCP base, SWT, OSGi and JDT core plug-ins) are targeted to specific classes of operating environments, requiring their source code to only reference facilities available in particular class libraries (e.g. J2ME Foundation 1.0, J2SE 1.3 and 1.4, etc.).
In general, the 3.4 release of the Eclipse Project is developed on a mix of Java 1.4 and Java5 VMs. As such, the Eclipse Project SDK as a whole is targeted at both 1.4 and Java5 VMs, with full functionality available for 1.4 level development everywhere, and new Java5 specific capabilities available when running on a Java5 VM. Similarly, in cases where support has been added for Java6 specific features (e.g. JSR-199, JSR-269, etc.) Java6 VMs are required.
Appendix 1 contains a table that indicates the class library level required for each plug-in.
There are many different implementations of the Java Platform running atop a variety of operating systems. We focus Eclipse SDK testing on a handful of popular combinations of operating system and Java Platform; these are our reference platforms. Eclipse undoubtedly runs fine in many operating environments beyond the reference platforms we test, including those using Java6 VMs. However, since we do not systematically test them we cannot vouch for them. Problems encountered when running Eclipse on a non-reference platform that cannot be recreated on any reference platform will be given lower priority than problems with running Eclipse on a reference platform.
The Eclipse SDK 3.4 is tested and validated on the following reference platforms
Reference Platforms |
Microsoft Windows Vista, x86-32, Win32 running (any of):
|
Microsoft Windows XP, x86-32, Win32 running (any of):
|
Red Hat Enterprise Linux 5.0, x86-32, GTK running (any of):
|
SUSE Linux Enterprise Server 10, x86-32, GTK running (any
of):
|
Microsoft Windows Vista, x86-64, Win32 running (any of):
|
Microsoft Windows XP Professional x64 Edition, x86-64, Win32 running (any of):
|
Red Hat Enterprise Linux 4.0 update 2, x86-64, GTK running:
|
Sun Solaris 10, SPARC, GTK running:
|
HP-UX 11i v2, ia64, Motif 2.1, GTK running:
|
IBM AIX 5.3, Power, Motif 2.1 running:
|
Red Hat Enterprise Linux 5.0, Power, GTK running:
|
SUSE Linux Enterprise Server 10, Power, GTK running:
|
Apple Mac OS X 10.5, Universal, Carbon running:
|
Because Java 1.4.2 and Java5 based platforms are used for most Eclipse development, those platforms are listed here. Although there are teams doing some Java 6 based development we have not included specific Java6 VMs, since they have not yet received the general level of testing we require. We expect that Eclipse will work fine on other current Java VMs running on window systems supported by SWT, but can not flag these as reference platforms without significant community support for testing them.
Similarly, although untested, the Eclipse SDK should work fine on other OSes that support the same window system. For Win32: NT, 2000, and Server 2003; SWT HTML viewer requires Internet Explorer 5 (or higher). For GTK on other Linux systems: version 2.2.1 of the GTK+ widget toolkit and associated libraries (GLib, Pango); SWT HTML viewer requires Mozilla 1.4GTK2. For Motif on Linux systems: Open Motif 2.1 (included); SWT HTML viewer requires Mozilla 1.4GTK2.
SWT is also supported on the QNX Neutrino operating system, x86 processor, Photon window system, and IBM J9™ VM. Eclipse 3.4 on Windows or Linux can be used to cross-develop QNX applications. (Eclipse 3.4 is unavailable on QNX because there is currently no 1.5 J2SE for QNX.)
The Eclipse SDK is designed as the basis for internationalized products. The user interface elements provided by the Eclipse SDK components, including dialogs and error messages, are externalized. The English strings are provided as the default resource bundles.
Latin-1 and DBCS locales are supported by the Eclipse SDK on all reference platforms; BIDI locales are supported by the Eclipse SDK everywhere but on Motif.
The Eclipse SDK supports GB 18030 (level 1), the Chinese code page standard, on Windows XP and 2000, Linux/GTK and the Macintosh.
German and Japanese locales are tested.
Eclipse 3.4 is compatible with Eclipse 3.3 (and, hence, with 3.2, 3.1 and 3.0).
API Contract Compatibility: Eclipse SDK 3.4 is upwards contract-compatible with Eclipse SDK 3.3 except in those areas noted in the Eclipse 3.4 Plug-in Migration Guide. Programs that use affected APIs and extension points need to be ported to Eclipse SDK 3.4 APIs. Downward contract compatibility is not supported. There is no guarantee that compliance with Eclipse SDK 3.4 APIs would ensure compliance with Eclipse SDK 3.3 APIs. Refer to Evolving Java-based APIs for a discussion of the kinds of API changes that maintain contract compatibility.
Binary (plug-in) Compatibility: Eclipse SDK 3.4 is upwards binary-compatible with Eclipse SDK 3.3 except in those areas noted in the Eclipse 3.4 Plug-in Migration Guide. Downward plug-in compatibility is not supported. Plug-ins for Eclipse SDK 3.4 are not usable in Eclipse SDK 3.3. Refer to Evolving Java-based APIs for a discussion of the kinds of API changes that maintain binary compatibility.
Source Compatibility: Eclipse SDK 3.4 is upwards source-compatible with Eclipse SDK 3.3 except in the areas noted in the Eclipse 3.4 Plug-in Migration Guide. This means that source files written to use Eclipse SDK 3.3 APIs might successfully compile and run against Eclipse SDK 3.4 APIs, although this is not guaranteed. Downward source compatibility is not supported. If source files use new Eclipse SDK APIs, they will not be usable with an earlier version of the Eclipse SDK.
Workspace Compatibility: Eclipse SDK 3.4 is upwards workspace-compatible with Eclipse SDK 3.3 unless noted. This means that workspaces and projects created with Eclipse SDK 3.3, 3.2, 3.1 or 3.0 can be successfully opened by Eclipse SDK 3.4 and upgraded to a 3.4 workspace. This includes both hidden metadata, which is localized to a particular workspace, as well as metadata files found within a workspace project (e.g., the .project file), which may propagate between workspaces via file copying or team repositories. Individual plug-ins developed for Eclipse SDK 3.4 should provide similar upwards compatibility for their hidden and visible workspace metadata created by earlier versions; 3.4 plug-in developers are responsible for ensuring that their plug-ins recognize 3.3, 3.2, 3.1, 3.0, 2.1, and 2.0 metadata and process it appropriately. User interface session state may be discarded when a workspace is upgraded. Downward workspace compatibility is not supported. A workspace created (or opened) by a product based on Eclipse 3.4 will be unusable with a product based an earlier version of Eclipse. Visible metadata files created (or overwritten) by Eclipse 3.4 will generally be unusable with earlier versions of Eclipse.
Non-compliant usage of API's: All non-API methods and classes, and certainly everything in a package with "internal" in its name, are considered implementation details which may vary between operating environment and are subject to change without notice. Client plug-ins that directly depend on anything other than what is specified in the Eclipse SDK API are inherently unsupportable and receive no guarantees about compatibility within a single release much less with earlier releases. Refer to How to Use the Eclipse API for information about how to write compliant plug-ins.
3.1 General problems
3.1.1 Startup
3.1.2 GCJ
3.1.3 UNC Paths
3.1.4 64-bit Java HotSpot(TM) VM
3.2 Platform
3.2.1 Core
3.2.2 Ant
3.2.3 User Assistance
3.2.4 UI
3.2.5 Text
3.2.6 SWT
3.2.7 Team and CVS
3.2.8 Install/Update
3.2.9 Debug
3.2.10 Compare
3.3 Java development tools (JDT)
3.4 Plug-in Development Environment (PDE)
Note: Bug numbers refer to the Eclipse project bug database at http://bugs.eclipse.org/bugs/
Here are some common problems that can cause Eclipse not to start:
Eclipse will fail to launch if installed in a directory whose path contains certain invalid characters, including :%#<>"!. The workaround is to install Eclipse in a directory whose path does not contain invalid characters. (bugs 3109 and 17281)
The Sun VM may hang indefinitely during class loading if it runs out of permanent generation memory. This will cause CPU usage to stay at 100% until the process is ended. See the section Running Eclipse for details on addressing this VM problem.
GCJ is an effort by the GCC team to provide an open source Java compiler and runtime environment to interpret Java bytecode. Unfortunately, the GCJ runtime environment is not an environment that is often tested on by Eclipse developers.
The most common problems surrounding GCJ are:
The workspace's log file is a good place to check to identify whether GCJ is being used or not. Every Eclipse log session should be prepended with information about the runtime environment that was used to run Eclipse. The log may include something like the following:
java.fullversion=GNU libgcj 4.2.1 (Debian 4.2.1-5)
If Eclipse does start, one can check which runtime environment is being used to run Eclipse by going to 'Help > About Eclipse SDK > Configuration Details'. The About Dialog itself can also provide other information, the build identifier can be of particular interest as it is tagged by some distributions. This allows the user to identify whether Eclipse was downloaded through the distribution's package management system or directly from the eclipse.org website.
Eg:Build id: M20070212-1330 (Ubuntu version: 3.2.2-0ubuntu3)
The two most common workarounds are:
To download Eclipse, try one of the links below:
It is imperative that 64-bit builds are downloaded and used if a 64-bit Java runtime environment has been installed. Below are two sample tarball names of version 3.4.0 of the Eclipse SDK packaged for 32-bit and 64-bit processors.eclipse-SDK-3.4-linux-gtk.tar.gz (32-bit) eclipse-SDK-3.4-linux-gtk-x86_64.tar.gz (64-bit)
To run Eclipse with an alternate Java runtime environment, the path to the Java virtual machine's binary must be identified. With an Eclipse installation from the distribution, altering the $PATH variable to include the path to the alternate Java runtime environment is often not enough as the Eclipse that Linux distributions package often performs a scan internally to pick up GCJ by itself whilst ignoring what's on the $PATH. An example of the terminal's output is shown below:
searching for compatible vm...
testing /usr/lib/jvm/java-7-icedtea...not found
testing /usr/lib/jvm/java-gcj...found
Once the path to the virtual machine's binary has been identified, try running Eclipse with the following command:
./eclipse -vm /path/to/jre/bin/java
For an actual example, it might look something like the following:
./eclipse -vm /usr/lib/jvm/sun-java-6/bin/java
./eclipse -vm /opt/sun-jdk-1.6.0.02/bin/java
If this seems to solve the problem, it is likely that the problem really was related to the use of GCJ as the Java runtime for running Eclipse. The eclipse.ini file located within Eclipse's folder can be altered to automatically pass this argument to Eclipse at startup. An example of its content is presented below:
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
-vm
/opt/sun-jdk-1.6.0.02/bin/java
-vmargs
-Xms40m
-Xmx512m
Note that every argument must be on its own line. More information about the eclipse.ini file can be found at http://wiki.eclipse.org/Eclipse.ini.
If problems persists after downloading an installation of Eclipse from eclipse.org and using a supported Java runtime environment (a list of which may be found above), you can seek further assistance through the newsgroups, the IRC channel, and/or bugzilla.
Eclipse 3.4.0 does not properly handle installation in a directory using Universal Naming Convention (UNC) paths. Limited uses of the platform will work in this environment, but there are known bugs with starting workspaces on a UNC location, or upgrading software installed in a UNC location (bug 235629, bug 207103). The platform is not well tested in such an environment.
There is a known issue with the 64-bit Java HotSpot(TM) 1.6.0 VM compiler which causes eclipse to crash (see Sun bug http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6614100, and Eclipse bug 214092). The crash usually occurs within a VM CompilerThread when attempting to compile the method org.eclipse.core.internal.dtree.DataTreeNode.forwardDeltaWith.
To work around the issue you can exclude the method org.eclipse.core.internal.dtree.DataTreeNode.forwardDeltaWith from being compiled with the following VM argument:
-XX:CompileCommand=exclude,org/eclipse/core/internal/dtree/DataTreeNode,forwardDeltaWith
This VM argument can be placed in the eclipse.ini file after the -vmargs line like the following:
-startup
plugins\org.eclipse.equinox.launcher_1.0.100.v20080509-1800.jar
--launcher.library
plugins\org.eclipse.equinox.launcher.win32.win32.x86_1.0.100.v20080509-1800
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256m
-vmargs
-XX:CompileCommand=exclude,org/eclipse/core/internal/dtree/DataTreeNode,forwardDeltaWith
-Xms40m
-Xmx256m
There have been reports of other classes that cause the compiler to crash. If all else fails you can disable the compiler with the VM arg "-Xint".
If you have installed new plug-ins and they aren't showing up when you run, then perhaps you unzipped them into your "plugins" directory and your configuration might need to be refreshed. This can be accomplished by starting Eclipse with the -clean command line argument.
Eclipse will fail to detect the proper content type for XML files that have a UTF-8 byte order mark if Crimson is the XML parser (as it is on Sun 1.4 JREs, but not on Sun 1.5 JREs). This problem will prevent actions normally available when files of the affected content types are selected from being presented to the user. The workaround is to ensure the default XML parser supports UTF-8 BOMs (such as Xerces does). (bug 67048)
If you have an old config.ini file and use it with a new Eclipse build, you may not get the correct product branding. This is because the id of the standard Eclipse product changed. Users in shared install scenarios may end up in this situation as previous builds of Eclipse automatically generated config.ini files in some cases. The work around is either to delete the local config.ini or update the eclipse.product line to read eclipse.product=org.eclipse.platform.ide.
There is a known issue with trying to load classes from a newly-created
thread using a class loader different from the plug-in class loader. The result
will be a ClassNotFoundException
. As a workaround, do the
following:
If you set the context class loader for the current thread, you are competing with other users of the thread (all of Eclipse), so the results will be unpredictable. However, there should be no problem in practice provided you reset the context class loader back to its original value when your use in the current thread is complete. (bug 8907)
If Plugin.startup
code is too complex and performs tasks such
as creating an executable extension, a deadlock situation can be created. Only
simple bookkeeping tasks should be performed in Plugin.startup
code. (bug 5875)
If your plug-in ships with a plug-in manifest and not an OSGi bundle manifest, is shipped as a JAR file, and contains a nested JAR file then there may be problems in the automatic generation of the bundle manifest file. The packages defined in the nested JAR may not be exported correctly in the Export-packages bundle manifest header. To work around this you should ship your plug-in with a bundle manifest. (bug 97689)
If you are running in debug mode on Mac OS, the default location for the .options file is inside the application bundle in the Eclipse.app/Contents/MacOS directory (like the eclipse.ini). (bug 88782)
When launching an Eclipse Application from within the Eclipse IDE it is possible to select the set of plug-ins that are included in the Eclipse Application. Removing the org.eclipse.update.configurator plug-in from the set of plug-ins to an existing configuration can cause the configuration to become invalid. This can result in extra plug-ins installed in the target application that are not resolved. To work around this, after the org.eclipse.update.configurator plug-in has been removed, the target configuration area should be cleared before launching. (bug 85835)
There may be issues when using a JNI implementation that uses FindClass in a function where the JNIEnv pointer is not available, such as in a C callback (bug 125250). The reason is that FindClass, in this case, uses the application class loader to find the class. If the desired class is in the classpath used for the application classloader (e.g. defined by the VM argument -cp <classpath>), as it would typically be in a stand-alone application, there is no problem. However, under Eclipse, the application classloader does not have access to classes contained in plug-ins. Eclipse uses its own class loader to find classes contained in plug-ins.
The proper plug-in class loader is used by FindClass in JNI functions which are passed the JNIEnv pointer, but not when you have to use AttachCurrentThread to get the JNIEnv pointer. In this case the application classloader is used.
For example, the following will fail because AttachCurrentThread is used to get the JNIEnv pointer:
static JavaVM* jvm; // Global variable void myCallback(void) { JNIEnv* env; jvm->AttachCurrentThread((void**)&env, NULL); // Fails if some/class is not in the application classloader: jclass cls = env->FindClass("some/class"); jmethodID methodID = env->GetMethodID(cls, "methodName", "(Ljava/lang/String;)V or whatever signature"); env->CallVoidMethod(callback, methodID, ...); jvm->DetachCurrentThread(); } }
A solution is to cache the method ID, for example:
static jmethodID mid; // Global variable JNIEXPORT jint JNICALL JNI_OnLoad(JavaVM *vm, void *reserved) { ... // Store the JavaVM pointer jvm = vm; // Find the class and store the method ID // Will use the class loader that loaded the JNI library jclass cls = env->FindClass(className"some/class"); if(!cls) goto ERR; mid = env->GetMethodID(cls, "methodName", "(Ljava/lang/String;)V or whatever signature"); if(!mid) goto ERR; ... } void myCallback(void) { JNIEnv* env; jvm->AttachCurrentThread((void**)&env, NULL); env->CallVoidMethod(callback, mid, ...); // Handle error ... jvm->DetachCurrentThread(); } }
UTF-8 encoded buildfiles with byte order marks will fail to be parsed correctly depending on the XML parser being used for the build. Therefore a valid buildfile will fail to build with an error message similar to: "BUILD FAILED: C:\workspace\bom.xml:1: Document root element is missing.". To succeed in building with these files, ensure to include Xerces jars on the Ant runtime classpath so that the Xerces parser is used to parse the XML. As well the context menu for these files in the Navigator or Package Explorer will not have the run shortcuts for Ant builds. (bug 67048)
Including the class files for custom Ant tasks or Ant types in the regular
code JAR for your plug-in causes problems. These class files must be provided in
a separate JAR that is contributed to the org.eclipse.ant.core.antTasks
or antTypes
extension point (and not declared as a library in the
plug-in's manifest). This ensures that the Ant tasks and types are loaded by the
special Ant class loader and not by a plug-in classloader. (bug 34466).
Eclipse can run Ant in the same JVM as the rest of Eclipse. Several aspects of Ant and its use of global Java resources (such as System.out and System.err), make it unsafe to run more than one Ant build concurrently in the same JVM. (bug 24129).
Certain Ant tasks are known to leak memory. Please see the bug report for details, patches, and possible workarounds. (bug 24448)
As with using Ant from the command line, prompts for input from the console is not handled. This is not the same as making use of the <input> task, which works correctly within Eclipse. (bug 21748)
The Xalan libraries set system properties including a version property. These get set as properties within the Ant build and therefore the "version" property cannot be set within an Ant buildfile due to the immutable nature of Ant properties. This property will always be set to "2.4.1" for Ant builds in the same VM as Eclipse. (bug 45717)
Since there are differences when running Ant from the commandline and within Eclipse, some extra steps may be needed to have XDoclet support function correctly within Eclipse. Problems may occur creating XDoclet subtasks. The workarounds and full discussion can be found in bug report. (bug 37070)
Code completion provided by the Ant editor does not respect the user-specified version of org.eclipse.ant.core plug-in or ANT_HOME. Code completion proposals are mostly based on Ant 1.6.1 with some updates to Ant 1.6.5 (bug 30886)
On Windows 9X, using:<property environment="env"/> will cause Eclipse to hang if the build occurs in the same VM as Eclipse. Running the build in a separate VM will hang the build but not Eclipse. (bug 44196)
When debugging Ant builds within Eclipse, setting -logger as a program argument will be ignored.
If you rename an existing external tool builder that is configured to run during auto-builds, you will get the following error: Errors during build. Errors running builder "Integrated External Tool Builder" on project <PROJECT_NAME>. The builder launch configuration could not be found. The workaround is to first disable the builder for auto-builds and then rename the builder. (bug 118294)
The Ant editor is slow on saving with buildfiles that have <import> declarations of buildfiles that have numerous <macrodef>s. See bugs 92640 and 125117 for possible workarounds
Due to a bug in Ant 1.7.0, Ant builds will fail with an IllegalArgumentException if the Eclipse installation is in a location with spaces in the path. Embedded usage of Ant builds, such as plug-in export will also fail. See bug 187993 for possible workarounds
The default Welcome implementation is HTML-based and requires a supported browser in order to work. If no supported browser can be found, Welcome falls back to its Forms-based implementation, which has a different (simpler) appearance. Consult the SWT FAQ for supported browsers and setting up your browser to work with eclipse.
The Help browser's Print, Synchronize, and Bookmark buttons do not work for pages that are not actually installed with the product. However, you can always use the print command in the browser's context menu to print the page you're reading. (bug 44216)
- In the Control Panel, open Internet Options, select the Connections tab and choose LAN Settings.
- If your host was configured to use DHCP for IP assignment, make sure that the "Automatically detect settings" check box is cleared.
- If you use a proxy server, ensure that the "Bypass proxy server for local addresses" is selected.
- In "Advanced" settings for proxies, add "127.0.0.1;localhost" to the "Exceptions" if these addresses are not listed.
- If you are using an automatic configuration script for proxy settings, and are not sure that the script is correct, clear the "Use automatic configuration script" check box.
If the above steps do not fix your problem, try changing the port and host
properties on the Help > Help Server preference page. In general,
setting host
to localhost
or 127.0.0.1
should work. Also, especially when running a firewall, you may want to specify
port 80 or some other firewall-friendly value. (bugs 7036,
9418, 11394)
Windows High Contrast settings are not consistently picked up by Internet Explorer when they are set from the Accessibility Options utility as opposed to when they are set using the predefined schemes. On Windows XP, it is recommended to set High Contrast as follows: Right click the desktop, chose properties, select Windows Classic style from the Windows and buttons drop down on the Appearance tab, and choose your scheme (for example High Contrast Black) from Color Scheme drop down. (bug 28609)
If you see a help launched with a blank page, and no errors displayed, it can be caused by a conflict between libraries in org.eclipse.tomcat plug-in and jars optionally installed in JRE jre/lib/ext directory. To fix the problem, ensure that the JRE used for running Eclipse does not contain any J2EE or Apache jars in the jre/lib/ext directory. (bug 63970)
Eclipse was tested for High Contrast using 1152 x 864 resolution in Windows XP High Contrast mode. You can select this mode by selecting Accessibility Options > Display > Use High Contrast from the Windows XP Control Panel menu.
Note: the bug report associated with this problem has been fixed. If you run Eclipse with JDK 1.5 or greater you should not have to use the workaround stated below any longer. However, the problem still exists when running Eclipse with JDK 1.4.x or lower, so in this case the workaround is still required .
The "Text file encoding" value displayed in the Preferences dialog under "Editors" may be wrong on platforms running Windows XP (or 2000) when the user locale and system locale differ.
Example of the manifestation of the bug: A Japanese user using Japanese Windows 2000 works in New York, United States. The user has selected English (United States) as the user locale. The "Text file encoding" value displayed by Eclipse is incorrect: "Cp1252" (English). It should display the system locale "MS932" (Japanese).
Workaround: The user can modify the user locale so that user locale and system locale are identical. In the example above, this means the user should set Japanese as the user locale. Then restart Eclipse. The "Text file encoding" value will then be correct: "MS932" (Japanese).
For Windows XP:
For Windows 2000:
(bug 20641)
The dirty state for an OLE document is not updated properly. This causes Eclipse to prompt to save the contents of the editor when the document is closed, even if the contents have already been saved. (bug 2564)
If an OLE document crashes, Eclipse can crash, or the workbench menus can become inconsistent.
Workspaces that are currently using the Eclipse 2.1 Presentation will incorrectly 'inherit' the new min/max behavior when opened with 3.3.
Workaround:
Currently there is no way on the Max or Linux platforms to define the height for controls contributed to
toolbars, nor will those platforms respect the size returned by the control's computeSize
method. If you
encounter this issue there is currently no truly viable workaround.
(bug 183003)
The SWT Browser widget uses a platform-specific web browser to render HTML. The org.eclipse.swt.SWTError exception ("No more handles") is thrown on platforms that don't meet the requirements for running the Browser widget. Supported platforms and prerequisites are listed on the SWT FAQ item "Which platforms support the SWT Browser?".
With some versions of Synergy from Telelogic, Eclipse will crash when you try to open a file
dialog. This is due to a problem with the CMExplorer.dll. The workaround is to
upgrade to Synergy 6.4 (or higher) or to run regsvr32 /u CMExplorer.dll
and
reboot (note that this will disable Active CM).
(bug 87798)
On Vista, launching eclipse using -vmargs -Xmx[any size]
can crash eclipse when the FileDialog is opened.
The workaround is to use the default heap size, i.e. do not use the -Xmx
VM args.
(bug 188317)
With Acrobat Reader 6 or 7, some users have experienced an unresponsive user interface for up to two minutes when closing a browser which is displaying a PDF document. The workaround is to disable displaying PDF in the browser. In Adobe Reader select Edit > Preferences... > Internet and uncheck 'Display PDF in browser'. (bug 56184)
Some users who have installed Service Pack 2 on Windows XP have experienced crashes while using editors in Eclipse. The workaround is to place a working version of Windows\System32\USP10.DLL in the Eclipse startup directory or uninstall Service Pack 2. (bug 56390)
Some versions of RedHat Linux such as Fedora Core 3 and Enterprise Linux WS release 4 use a new technology called IIIM (Intranet/Internet Input Method Framework) to replace the old XIM (X input method). When running on these new systems, Eclipse will crash if you attempt to enter any DBCS character. The workaround is to use a XIM based input method such as chinput. This problem may be fixed in newer releases of RedHat. (bug 89722)
The Linux-motif build of Eclipse does not launch properly when run on a computer with Xinerama (provides support for dual head monitors) and a UTF-8 locale. The workaround for this problem is to change the locale to a non-UTF-8 value, or to disable Xinerama. (bug 38843)
If the application that is supplying the clipboard material is unresponsive, the paste operation hangs Eclipse for several minutes. This situation can be encountered when copying from an Eclipse target workbench, suspending the target workbench at a breakpoint and pasting into the hosting Eclipse workbench. (bug 44915)
When configured for the simplified Chinese locale, it is not possible to drag data between applications running on the Motif window system. This is a known limitation of the Open Motif library. (bug 29777)
There is a known AIX graphics bug affecting certain levels of AIX releases. Ensure that the AIX install includes the necessary service updates as described in the "Install notes/requirements for Eclipse on AIX" attachment to Eclipse bug report number 34524.
Typically, in Gnome Linux installs running with 8-bit visuals (i.e. 256 color mode), before the Eclipse application is started there are no free colors. This may mean that Eclipse is unable to allocate the default widget background color, causing it to display a white background. The functionality, however, is otherwise unaffected.
When using Linux Motif and GB18030 IME "chinput", Eclipse can crash if the IME client window is left open when the parent window is disposed. (bug 32045)
When typing Japanese text, the conversion to Kanji must be done one ideogram at a time. (bug 226636)
On QNX Photon and IBM AIX, the SWT library will not be found when running with an IBM J9 1.5 VM. This is a bug in the IBM J9 class library in version 1.5. You can workaround this problem by adding the SWT library directory to your LD_LIBRARY_PATH environment variable.
Under RHEL 3.1 with the IBM 1.4.2 JRE and a large number of plugins, Eclipse may fail to launch with an exception from gtk_init_check along with this error:
_X11TransSocketOpen: socket() failed for local _X11TransSocketOpenCOTSClient: Unable to open socket for local
A workaround is to set the environment variable JAVA_HIGH_ZIPFDS to a value of 500 before starting Eclipse. (bug 106396)
On some versions of Debian, Eclipse key bindings may stop working. In this context the only way to make the key bindings work again is to restart Eclipse.
The problem is that a focus issue exists in GTK+ 2.6.7 and earlier, for which SWT has a workaround. This workaround is incompatible with the GTK+ 2.6.7 fix, so a GTK+ version check is done at runtime to determine whether the workaround should be used or not. However, Debian backported the GTK+ focus fix into their libgtk+2.0 (2.6.4-2) package, so the SWT workaround and GTK+ fix are both incorrectly applied in this context.
To work around this problem, either get the Debian unstable version of GTK+, compile your own GTK+, or hack SWT's Shell.gtk_realize(int) and change the version that it checks. See SWT bug 107013 and GTK+ bug 109246 for more information.
The Browser widget cannot be used to display pages containing Java applets on Windows
and OS X, as a result of crashes that occur when attempting to launch a second JVM for the
applet that is in-process with the main process JVM. The workaround for clients wishing
to display web pages with Java applets is to launch an external web browser to do so with
org.eclipse.swt.program.Program
(see bugs
59506 and
100622).
Some users reported encountering system hangs while using Eclipse on Intel-based Macs. These hangs were traced to a problem in some versions of QuickTime, which has now been fixed. Therefore, Eclipse users on Intel-based Macs should use Quicktime's update facilities to ensure that their Quicktime version is at least 7.1.1. (bug 142892)
When running on the IBM Java 5.0 VM, Eclipse crashes while the user is typing in an editor.
If using this VM you must disable the JIT with the -Xnojit vm argument to avoid the crashes
(see bug 116730).
The command line for launching Eclipse with this vm should be:
eclipse -vmargs -Dosgi.locking=none -Xnojit
Eclipse fails to create a lock file with reason "No locks available".
To launch eclipse you must disable file locking using the osgi.locking property.
For example, you could launch eclipse as follows:
eclipse -vmargs -Dosgi.locking=none
In order to use the SWT_AWT bridge on the Mac, OS X jre version 1.5.0 Release 5 (or greater) must be used.
In order to print from eclipse on GTK, you need to have GTK+ version 2.10 or later. In addition, at least two print backends must exist on the machine: file and lpr. Assuming a that GTK was installed in /usr, the installed backends can be viewed at /usr/lib/gtk-2.0/2.10.0/printbackends.
OS X JRE version 1.6 assumes that pointers have a size of 64 bits, but SWT's Carbon port only uses 32-bit pointers, so SWT and Eclipse cannot be used with OS X JRE version 1.6. The workaround is to use an earlier supported version of the OS X JRE.
As a result of a late interface change in the Firefox 3.0/XULRunner 1.9 development stream,
most beta versions of these applications cannot be used by the Browser if its setText()
API is used. This problem can be fixed by upgrading to the final release versions of these
applications. (bug 235020)
Strings on wrapping Controls may not appear correctly in some locales on RHEL5 as a result of a bug in Pango version 1.14.x. This problem can be fixed by upgrading the installed Pango library to a version that is newer than 1.14.x. (bug 231951)
The following are known problems with the CVS repository provider only, and do not apply to other repository providers. Additional information on how to use CVS from Eclipse can be found in the Eclipse CVS FAQ.
The CVS plug-in parses messages returned from the CVS server. If the format of these messages is not as expected, some of the plug-in's functionality may be missing. The CVS plug-in is compatible with all stable 1.11.X builds of the CVS server, and should be compatible with future releases in that stream unless text message formats change (the last tested server was 1.11.22). As for the 1.12.X feature releases of CVS, the Eclipse CVS client has been tested with builds up to 1.12.13. However, future releases could easily break the Eclipse CVS client. Basic functionality, such as Checkout, Commit, and Update, should always work, but there may be problems with more advanced commands such as Synchronizing and Browsing the repository.
CVS now uses the Platform proxy settings. As a result, any CVS proxy settings will be lost and must be re-entered on the General>Network Connections preference page.
If a connection initially fails due to a network problem, the connection may continue to fail even when the network problem is fixed. In order to establish the connection you must exit and restart Eclipse. (bug 9295)
Eclipse sometimes performs multiple commands within a single connection to the server. This may cause problems with CVS servers that are running server scripts in response to certain commands. (bugs 23575 and 23581)
There is a bug in the CVS server related to some compression levels. If you get this error, changing the compression level on the CVS preference page may help. (bug 15724)
There are a few situations that can result in an "Unknown response" error messages when using the ext connection method. One situation involves using an external communications client (e.g. rsh or ssh) that adds CRs to the communications channel (bug 21180). Another involves Eclipse not properly reading the stderr output of the external communications tool. (bug 11633)
New in 3.0 is the ability to disable capabilities and the CVS support in Eclipse can be disabled. However, for backwards compatibility the CVS capability is auto-enabled in existing workspaces that already contain CVS projects. The auto-enabling function may not run if the team support plugin is not loaded at startup. (bug 66977)
When folders containing build output are shared they may get improperly marked as dirty when build output is generated.
When features and plug-ins are manually installed on top of an Eclipse-based product install located on a FAT file system that has already been run at least once, the product must be explicitly restarted with -clean. That is,
eclipse.exe -clean
You cannot install or update software from a site using https whose certificate is not chained to a trusted root certificate in your local certificate store. This typically means the server is using a self-signed certificate, or a certificate authenticated by an unknown third party.
If you have an extension location in an Eclipse-based application that is connected to your configuration via a link file, the extension is not removed when the link is deleted. The workaround is to move or delete the extension location, and restart the platform with the -clean command line argument. You can then restore or move back the extension location content to its original location (bug 232094).
Extension location is lost if the install path changes
A previously configured extension location may be temporarily removed if the install is moved or mounted
under a different path. This only happens when the link file that configures the
extension location uses a relative path that points to a directory under the Eclipse
install. On a second startup using the same install path, the extension location
is added again (bug 95403).
None. (Known problems with the Java debugger appear below in the JDT section.)
None.
org.eclipse.jdt.core.formatter.CodeFormatter.format(int, String, IRegion[], int, String)
has been added to allow the formatting of several regions in a source snippet with a single pass.org.eclipse.jdt.core.formatter.CodeFormatter#K_SINGLE_LINE_COMMENT
org.eclipse.jdt.core.formatter.CodeFormatter#K_MULTI_LINE_COMMENT
org.eclipse.jdt.core.formatter.CodeFormatter#K_JAVA_DOC
Search does not find references to constant fields inside binaries because the Java Language Specification mandates that constant field values be inlined in the class file's byte codes, leaving no trace of a field reference. (bug 12044)
The cut, copy, and paste actions do not work for linked files and folders appearing in views that show Java elements, including the Package Explorer. The workaround is to use these actions from the Navigator view instead. (bug 34568)
Applying a working set consisting entirely of elements from the JRE System library container as a filter to the packages view might result in an empty Package Explorer. (bug 35395)
Most class libraries do not properly support the creation of a system
process (via java.lang.Runtime.exec(...)
) when the specified
command line contains GB18030 characters. Since Javadoc is created using the
Javadoc executable provided with the JDK, generating Javadoc fails if the
package or class name contains GB18030 characters. (bug 32215)
The actions "Step into Selection" and "Run to Line" optimistically set breakpoints on the line the user has chosen to step into or run to. However, the debugger can not determine if or when execution will ever reach the chosen line. The breakpoints set by the underlying implementation are not visible to the user and can cause execution to suspend unexpectedly at a later time, when the associated line is actually executed. (bug 51507)
The default locale is generally initialized from the settings in the operating system when a target VM is launched. However, when using javaw.exe on JDK1.4.2, Windows XP, the default locale is incorrectly initialized to en_US, no matter what the operating system settings are. (bug 65945)
Exception breakpoints can be configured with location filters (inclusive and exclusive). When an unchecked exception is configured to not suspend execution in a specific class, execution will still suspend when the user preference to suspend on uncaught exceptions is on. (bug 66770)
java.lang.NoClassDefFoundError
when running Java
programs with non-Latin characters in the package or class names. The workaround
is to package the class files as a JAR file and run the program out of the JAR
and not from the file system directly. (bug 4181)
Most class libraries do not properly support the creation of a system
process (via java.lang.Runtime.exec(...)
) when the specified
command line contains GB18030 characters. This limitation means the debugger
cannot launch applications when the command line it generates contains GB18030
characters. (bug 32206)
Automatic JRE detection fails when the JRE is stored in a directory containing GB18030 characters in its name. (bug 33844)
If a debug session suspends on a java.lang.StackOverflowError
exception (due to an exception breakpoint), the debugger may not be able to
retrieve any debug information from the target JVM. As well, the debugger may
not be able to reliably interact with the target JVM past this point. (bug 19217)
The debugger uses threads in the target JVM to perform evaluations (both
explicit evaluations that the user requests, and implicit evaluations such as toString()
invocations in the Variables view). The Java Debug Interface (JDI)
requires that the thread in which an evaluation is performed be suspended by a
user event (that is, a breakpoint or step request). Evaluations cannot be
performed on threads suspended by the suspend action. As well, when a breakpoint
is configured to suspend the JVM rather than just the individual thread, the
threads which did not encounter the breakpoint are not in a valid state to
perform an evaluation. When an evaluation is attempted in a thread that is not
in a valid state to perform an evaluation, an error message will appear to the
effect of "Thread must be suspended by step or breakpoint to perform method
invocation". (bug 34440)
rt.jar
") are compiled without
complete debug attributes, and thus local variables and method arguments for
those classes are not visible in the debugger.
Hot code replace is supported on JDK 1.4.x VMs, and IBM J9 VMs. The debugger will attempt to replace all class files that change in the workspace as the user edits and builds source code. However, hot code replace is limited to changes that a particular virtual machine implementation supports. For example, changes within existing methods may be supported, but the addition or removal of members may not be.
Note that hot code replace and stepping on JDK 1.4.0 VMs was unreliable. The underlying VM problems were fixed in JDK 1.4.1, and later.
When a snippet is run in the scrapbook which directly or indirectly calls System.exit(int)
,
the evaluation cannot be completed, and will result in a stack trace for a com.sun.jdi.VMDisconnectedException
being displayed in the scrapbook editor.
Terminating a scrapbook page while it is performing an evaluation results
in a com.sun.jdi.VMDisconnectedException
being displayed in the
scrapbook editor.
System.out
or System.err
, the output may not appear immediately unless the
native performs a flush on the output buffer.
When a non-source page of the feature manifest editor is used, PDE will convert changes back into XML by regenerating the file. Although the overall content and most of the comments are preserved, some comments may be lost. (bug 59502)
In the plug-in import wizard, when you choose to import plug-ins as "projects with source folders", PDE will not unzip the source for the org.apache.ant, org.eclipse.core.runtime.compatibility.registry, org.eclipse.osgi.util and org.eclipse.osgi.services. This is because the source ZIPs contains code that will not compile when unzipped as it requires additional JARs that are not part of the SDK. To avoid the creation of plug-in projects that won't compile, PDE will import these plug-ins as binary and attach source, so you would still be able to read the source, you just won't be able to modify it. Also, PDE will not unzip the source for the org.eclipse.swt plug-ins. In this case, it is because, when shipped, the swt code is spread across a plug-in and a fragment, and when unzipped, it will require circular dependencies between the plug-in and fragment projects. These circular dependencies are at minimum marked as warnings by the JDT compiler and may result in unpredictable build behavior. Therefore, PDE always imports org.eclipse.swt as binary with source attached. (bug 66314)
Non-default key bindings currently do not work in fields on non-source pages of the PDE manifest editors. (bug 19482)
The Eclipse platform allows two plug-ins with the same ID but different versions to coexist if the only thing they contribute is run-time libraries. However, PDE cannot handle these plug-ins because it creates project names using plug-in IDs during binary project import. (bug 18500)
When exporting a plug-in using the plug-in, feature or product wizards, some classes might be dropped from the resulting archive if their fully qualified name is too long. This typical path limitation can be worked around by creating the jar of the problematic plug-in by using the Jar export wizard. (bug 97150)
When exporting multiple plug-ins and one is stored outside of the workspace, compile errors occurs on export. To work around the problem, you can either export the plug-ins one by one, or change their location. (bug 98579)
When running a headless build using the scripts provided by pde build, the properties builder
and buildDirectory
must refer to a fully qualified path.
(bug 139554)
With the new p2 provisioning system in 3.4, PDE introduced a preference to control how target platforms are built. By default, this preference is on if your target equals your host, otherwise it's off. When this preference is enabled, PDE attempts to read a target platform's configuration and build the target platform based in the target's list of installed plug-ins. If a configuration can't be found (a bundles.info or platform.xml file), PDE will simply manually scan the target directory and populate the target platform's list of plug-ins. (bug 226037 and bug 225148)
If you're using the delta pack, the target platform preference for building a target based on the target's installed plug-ins must be checked off. This is because a target's runtime configuration only contains plug-ins specific to the platform it's running on. (bug 230146)
After installing the Eclipse SDK in a directory, you can start the Workbench
by running the Eclipse executable included with the release (you also need a 1.4.2
JRE, not included with the Eclipse SDK). On Windows, the executable file is called eclipse.exe,
and is located in the eclipse
sub-directory of the install. If
installed at c:\eclipse-SDK-3.4-win32
, the executable is c:\eclipse-SDK-3.4-win32\eclipse\eclipse.exe
.
Note: Set-up on most other operating environments is analogous. Special
instructions for Mac OS X are listed below.
By default, Eclipse will allocate up to 256 megabytes of Java heap memory. This should
be ample for all typical development tasks. However, depending on the JRE
that you are running, the number of additional plug-ins you are using, and
the number of files you will be working with, you could conceivably have to increase this amount.
Eclipse allows you to pass arguments directly to the Java VM using the
-vmargs
command line argument, which must follow all other Eclipse specific arguments.
Thus, to increase the available heap memory, you would typically use:
eclipse -vmargs -Xmx<memory size>
with the <memory size>
value set to greater than
"256M" (256 megabytes -- the default).
When using a Sun VM, you may also need to increase the size of the permanent generation memory. The default maximum is 64 megabytes, but more may be needed depending on your plug-in configuration and use. When the VM runs out of permanent generation memory, it may crash or hang during class loading. This failure is less common when using Sun JRE version 1.5.0_07 or greater. The maximum permanent generation size is increased using the -XX:MaxPermSize=<memory size> argument:
eclipse -vmargs -XX:MaxPermSize=<memory size>
This argument may not be available for all VM versions and platforms; consult your VM documentation for more details.
Note that setting memory sizes to be larger than the amount of available physical memory on your machine will cause Java to "thrash" as it copies objects back and forth to virtual memory, which will severely degrade your performance.
When the Workbench is launched, the first thing you see is a
dialog that allows you to select where the workspace will be located. The
workspace is the directory where your work will be stored.
If you do not specify otherwise, Eclipse creates the workspace in your
user directory.
This workspace directory is used as the default content area for your projects
as well as for holding any required metadata. For shared or multi-workspace
installs you must explicitly specify the location for your workspace using the
dialog (or via the "-data
" command line argument).
Here is a typical Eclipse command line:
eclipse -vm c:\jdk1.4.2\jre\bin\javaw
Tip: It's generally a good idea to explicitly specify which Java VM to
use when running Eclipse. This is achieved with the "-vm
"
command line argument as illustrated above. If you don't use "-vm
",
Eclipse will look on the O/S path. When you install other Java-based products,
they may change your path and could result in a different Java VM being used
when you next launch Eclipse.
To create a Windows shortcut to an installed Eclipse:
eclipse.exe
in Windows Explorer and use Create
Shortcut on the content menu.Opening this shortcut launches Eclipse. (You can drag the shortcut to the Windows Desktop if you want to keep it in easy reach.)
On Mac OS X, you start Eclipse by double clicking the Eclipse application. If you need to
pass arguments to Eclipse, you'll have to edit the eclipse.ini
file
inside the Eclipse application bundle: select the Eclipse application bundle icon while holding down the Control Key.
This will present you with a popup menu. Select "Show Package Contents" in the popup menu.
Locate eclipse.ini
file in the Contents/MacOS
sub-folder and open it with your favorite text editor to edit the command line options.
On MacOS X you can only launch a UI program more then once if you have separate copies of the program on disk. The reason for this behavior is that every UI application on Mac can open multiple documents, so typically there is no need to open a program twice. Since Eclipse cannot open more than one workspace, this means you have to make a copy of the Eclipse install if you want to open more then one workspace at the same time (bug 139319).
If you need to launch Eclipse from the command line, you can use the symbolic link "eclipse" in the top-level eclipse folder. It refers to the eclipse executable inside the application bundle and takes the same arguments as "eclipse.exe" on other platforms.
On Mac OS X 10.4 and later, you may notice a slow down when working with significant numbers of resources if you allow Spotlight to index your workspace. To prevent this, start System Preferences, select the Spotlight icon, then the Privacy tab, then click the Add button ("+") and find your workspace directory in the dialog that appears.
The startup speed of a shared install can be improved if proper cache information is stored in the shared install area. To achieve this, after unzipping Eclipse distribution, run Eclipse once with the "-initialize" option from an account that has a write access to the install directory.
If you weren't previously using "-data" to specify your workspace, follow these steps to upgrade:
workspace
". If
you are using a shortcut or script to launch Eclipse, then it will be under
the current working directory of that shortcut or script in a sub-directory
called "workspace". For Windows users, this is specified by the
"Start in:" argument in your shortcut properties.-data
"
command line argument to pre-select the workspace location).If you were previously using the "-data
" argument to
start Eclipse, your upgrade path is much easier:
-data
"
command line argument to pre-select the workspace location).Note: Copying your workspace is recommended because, after you've upgraded your workspace, you won't be able to use it again with an older version of Eclipse. If you ever want to go "back in time" to an earlier release, you will need that backup.
Special care is required when a project in a team repository is being loaded and operated on by developers using Eclipse-based products based on different feature or plug-in versions. The general problem is that the existence, contents, and interpretation of metadata files in the workspaces may be specific to a particular feature or plug-in version, and differ between versions. The workspace compatibility guarantees only cover cases where all developers upgrade their Eclipse workspaces in lock step. In those cases there should be no problem with shared metadata. However, when some developers are working in Eclipse 3.4 while others are working in Eclipse 3.3, there are no such guarantees. This section provides advice for what to do and not to do. It addresses the specific issues with the Eclipse SDK.
The typical failure mode is noticed by the 3.4 user. 3.4 metadata is lost when a 3.3 user saves changes and then commits the updated metadata files to the repository. Here's how things typically go awry:
Here are some things to watch out for when sharing projects between Eclipse 3.4 and Eclipse 3.1 or earlier:
It is also possible (and reasonable) to use Eclipse 3.4 to develop a plug-in intended to work in Eclipse 3.3 or earlier. Use the Plug-in Development > Target Platform preference page to locate non-workspace plug-ins in an Eclipse 3.3 install. This ensures that the code for your plug-in is being compiled and tested against Eclipse 3.3 APIs, extension points, and plug-ins. (The above list of concerns do not apply since they affect the layout and interpretation of files in the plug-in project but none affect the actual deployed form of the plug-in.)
Release 3.4.1 is a maintenance release to fix serious defects present in release 3.4.1 These changes only affect some plug-ins and features.
Maintenance release 3.4.1 contains fixes for the following defects and others:
ID | Summary |
---|---|
101610 | Code assist not offered without transitive dependency |
112502 | [TabbedProperties] Properties view doesn't scroll normally |
138013 | [TabbedProperties] resize the table column in a tabbed property section and invoke the update method on the container does not work |
140314 | [TabbedProperties] Advanced Info tab doesn't scroll to reveal |
158361 | [prefs] Thread safety problem in InstancePreferences |
161095 | [CommonNavigator] Drag and Drop of non IResource items causes FileTransfer to be created with null data |
169559 | [CommonNavigator] [DND] - Drag/drop within the project explorer; doesn't scroll |
170758 | [CommonNavigator] org.eclipse.ui.navigator.resources should export all packages |
173218 | [SWT_AWT] SWT needs to support ModalityListener interface |
185561 | [CommonNavigator] When hideAvailableExtensionsTab sets to true, all available content will be removed upon filter select changed |
185715 | SiteOptimizerApplication passes empty string in place of pluginid to Status |
189529 | [CommonNavigator] Project Navigator - Customization dialog should use straight tabs or border |
191677 | [Preferences] Preference links don't switch preference pages if dialog already open in tips and tricks |
197503 | [Bundle][Wizard][New]PDE invalid warning: Bundle symbolic name contains illegal characters. |
198091 | [LinkedResources] Error logged when opening Properties dlg on a Linked Resource folder involving a path variable |
199022 | Updatemanager Digest generates invalid xml |
200316 | [CommonNavigator] Can not contribute property page to classpath container in project explorer |
200743 | [Clipboard] Copy/Paste intermittently doesn't work for a line of text |
202819 | [Workbench] Eclipse process continues to run in background after shutdown |
204700 | [CommonNavigator] ConcurrentModificationException trying to see phys - view |
204948 | [TabbedProperties] Scrollbars in Tabbed Properties View are set to an increment of 1, too small to be useful. |
208609 | Bug in ErrorRecoveryLog.getLocalRandomIdentifier(String path) |
210664 | Eclipse modifies .project file on project import without reason |
211578 | [build path] Dialog to extend classpath variable slow |
212389 | [CommonNavigator] working set issues: missing project, window working set inconsistency |
213732 | [Forms] Click on hyperlink in FormText fails |
213891 | [CommonNavigator] Project Explorer (in platform - NOT SDK!) is not refreshed on changes |
215161 | [generate constructor] Generate constructor using fields should respect field order |
217801 | [CommonNavigator] Capability filtering of commonWizard extensions uses wrong identifier |
218288 | [Wizards] NPE while sharing a project that already exists in the repository |
218945 | [GlobalActions]'Export...' and 'Exit' menu items under the 'File' menu share the same mnemonic |
219946 | [TabbedProperties] Tabbed property sheet tab titles can get truncated when selected |
220494 | the amazing vaporizing artifacts |
220599 | [CommonNavigator] Project Explorer does not support Navigate > Show In... |
222461 | [KeyBindings] WARNING messages generated for incorrect message content in plugin org.eclipse.ui.workbench |
222665 | Error opening workbench |
222962 | Repository created from PDE export should be compressed |
223556 | 3.3.1 and 3.3.2 readme files are missing internal anchor links |
226357 | [dom] NPE in MethodBinding.getParameterAnnotations() if some, but not all parameters are annotated |
226867 | [Browser] Web browser preference change causes web browser editor error through open file |
227949 | Key binding for Plugin Spy not working |
228354 | Folder deletion can cause incorrect project delta node flags if linked folders exist in project |
228359 | [CommonNavigator] CommonNavigator.selectReveal() should not expand selected elements |
228400 | disable transient test failure for watch expression update |
229494 | [Forms] Accessibility: expandable section labels are not being read by screen readers |
230853 | Sometime resources are disappeared from Synchronize View |
231175 | [Workbench] WorkbenchLabelProvider leaks |
231776 | [SWT Mac] Incorrect mouseExit event generated when balloon ToolTip is shown |
232162 | [Help] [Context] TVT34:TCT231: "refresh" text contains mnemonic in the F1 help view |
232426 | OutOfMemoryError during Project Refresh due to cyclic symbolic links |
232533 | [Help] TVT34:TCT310: ELL - Truncated button in Content preferences |
232565 | [1.5][compiler] wrong autoboxing code generation leads to VerifyError at runtime |
232982 | "Save password" checkbox behaves weird |
233029 | Unknown extension point errors appearing in target workspace |
233229 | Review UpdateSiteRepo for thread safety |
233240 | P2 Metadata Generator deletes all my plugins when running out of heap space while indexing an update site |
233259 | [formatter] html tag should not be split by formatter |
233261 | dialog window distorted after going out of "Not responding" state |
233297 | TreeModelContentProvider appears to throw an AIOOB |
233374 | [search] styled label not supported by search participant's label provider |
233510 | [breadcrumb] Needs review of label updating on element change |
233601 | [Commands] IAction.AS_RADIO_BUTTON actions contributed with ActionContributionItem to MenuManager have problems getting checked on selection |
233618 | [CommonNavigator] Cannot copy/paste a linked resources into a Folder. |
233941 | [ltk] Refactoring history does not show workspace refactorings from last year |
233961 | Progress should indicate that we are computing explanations |
234172 | [1.5][select] no hover in qualified name with generics |
234182 | [breadcrumb] keys don't work after dropdown opened via arrow button |
234330 | [breadcrumb] Does reopen child popup |
234394 | [launcher] fail to load vm when run from search path |
234484 | [DetachedView] Empty DW's can't be closed |
234619 | [1.5][compiler] Object#getClass() has wrong expression type binding with JRE from 1.6 |
234635 | [ui] The dialog that shows provisioning plan resolution results doesn't resize well |
234657 | [Webapp] Rhel5 Help Contents UI displayed incompletely in High Contrast mode or with Large font |
234875 | [Browser] Delete key is eaten in Internal Web Browser |
235006 | After install launcher restarts in infinite loop |
235018 | [Markers] Regression: Columns in Problems view grow wider with each restart |
235125 | Director may fail when -version is not specified |
235195 | [Wizards] [DataBinding] Non-error statuses not handled correctly by WizardPageSupport class |
235336 | [p2] cannot compile against plugins referenced via .link files |
235375 | NPE when double-clicking on a new topic item in a toc editor |
235379 | [GlobalActions] GlobalUndoAction / GlobalRedoAction causes NPE by unsafely disposing old delegate |
235442 | Stale references to 'welcome_preferences.htm' in org.elcipse.platform.doc.user |
235480 | [Intro] Document need to escape anchors in showHelpTopic |
235496 | [p2] p2 bundle pooling uses incorrect directory |
235556 | [content assist] proposal popup does not hide after resize, then change app |
235589 | Using #{folder_prompt} in Workspace Data "Location" field on launch configuration prompts 2 times |
235629 | Can't create the osgi.instance.area on a UNC drive |
235719 | [CheatSheet] Cheat sheet item property dialog=false doesn't work when using "Click to redo" |
235778 | Potential race condition computing resolved classpath |
235804 | [Wizards] StackOverflowError in WizardsRegistryReader |
235882 | [compiler] constructor-scoped inner classes unable to recognize final member variable initialization |
235921 | [1.5][compiler] Incorrect generic signature attribute created for inner anonymous type |
235933 | Adding archive leaves file open |
235958 | java.lang.StackOverflowError in BundleLoader with version 3.4rc3 |
235996 | NPEs in GarbageCollector.contributeMarkSets in test log |
236096 | Incorrectly allow raw return type in overridden method |
236139 | Missing NLS messages in artifact.optimizers |
236224 | [clean up] Save Cleanup action "use_blocks_only_for_return_and_throw" toggles block |
236230 | [formatter] SIOOBE while formatting a compilation unit. |
236251 | [implementation] failure when launching headless |
236268 | [Webapp] help rendered with white borders at left & right in Firefox |
236312 | GTK Assertion for gdk_window_get_user_data |
236329 | [sec] Unchecked SecurityException thrown when SignatureException makes more sense |
236336 | [1.6][compiler] Stack map generation error with 10,000-line method in Java |
236403 | org.eclipse.equinox.p2.metadata.generator/plugin.xml misses header |
236445 | NPE in content assist |
236472 | Multiple problems caused by Compare Editor |
236517 | [ui] Refresh in "Available Software" does not refresh artifact repos |
236524 | [Help browser] Search does not start on pressing <Enter> |
236605 | [DataBinding] Duplicate entries in bound list after update |
236634 | Cannot dismiss attribute type combo |
236676 | PDE compiler properties page generates NPE |
236687 | NPE opening the errors / warnings property page |
236689 | [Browser] KeyDown/KeyUp events have wrong character for Delete key |
236724 | [Browser] Eclipse causes JVM crash in libxul when editing Java |
236795 | [JFace] SWT Exception creates endless cycle |
236876 | [api tooling] Should modify code to compile in 1.6 mode |
236903 | p2 feature names are inconsistent |
236937 | Composite sending incorrect Move events |
236968 | NPE in EclipseLaunchShortcut.findLaunchConfiguration |
236991 | [Help][Context] Entity Reference (e.g., &) doesn't work in context xml file |
237051 | [formatter] Formatter insert blank lines after javadoc if javadoc contains Commons Attributes @@ annotations |
237096 | Cryptic error attempting to build update site with jdt-feature |
237133 | Context Help Editor: Command field loses content |
237271 | Screenshot needs updating |
237314 | NullPointerException when swtiching targets |
237323 | [misc] org.eclipse.ui.ide.markerResolution extensions not referenced in Java editor |
237326 | [Help][Context] F1 accessibility - no indication that help view has opened (since there is no focus change) |
237365 | [Contributions] ActionDelegateHandlerProxy fails with ClassCastException |
237418 | deadlock between auto-build/refresh right after startup |
237469 | [assist] AbortCompilation in log during normal editing |
237475 | Error building update site with missing optional prerequisite |
237547 | [inline] npe while inlining constant |
237577 | [Webapp] Infocenter problems with locales, breadcrumbs and failure to read pages |
237612 | ISearchResultPage.setInput is called 4 times(sets current result too) by using search history |
237648 | [launcher] Unable to launch WPF version of Eclipse on Vista |
237662 | metadata generator loses start levels from bundles.info |
237687 | [ui] Improve error message when p2 properties are missing/broken in config.ini |
237747 | PDE headless build fails for config "win32, win32, x86_64" |
237884 | [DataBinding] NPE in when disposing MultiValidator instance |
237890 | additional plug-in locations are forgotten when reloading target platform |
237922 | PDE Build not generating RCP launcher branding icons |
237926 | p2 should only treat jars and folders as plug-ins |
237931 | [1.6][compiler] wrong signature of String[][] in class file |
237986 | XULRunner 1.9 sometimes crashes at shutdown |
238001 | Launcher icon branding does not handle Win32 x64 launcher .exe |
238014 | [1.5][compiler] Missing "name clash" error? |
238023 | Using relative ID "org.eclipse.ui.editorss" in Perspective Extension gives warning |
238090 | [formatter] New lines wrongly added while formatting too long @see references |
238119 | [ltk] AIOOBE when trying to delete added folder and its parents in Synchronize view |
238210 | [formatter] CodeFormatter wraps line comments without whitespaces |
238240 | InstructionParser should support escaped characters |
238312 | Startup times are very long when bundles are dropped into the dropins/plugins folder for large installations. |
238350 | Starting Java application (like JBoss) in debug causes NPE. Run mode works ok |
238392 | [Preferences] NPE when starting eclipse |
238463 | [working sets] closed projects are disappearing from working sets |
238484 | [1.5][compiler] Eclipse generates bad code (major regression) |
238487 | [logview] LogView assumes SHOW_FILTERED_TEXTS=true |
238718 | [navigation] Quick Outline filters items incorrectly |
238783 | [CommonNavigator] NavigatorSaveablesServices throws NullPointerException on shutdown |
238817 | [1.5][compiler] Unexpected nameclash reported |
238853 | [formatter] Code Formatter does not properly format valid xhtml (<br /> & <p />) in javadoc. |
238920 | [formatter] Code Formatter removes javadoc status if @category present |
238923 | [1.6][compiler] Internal compiler error caused by a for loop in an initializer block |
238961 | [Browser] Open with > web browser for url with spaces does not work with Firefox |
239015 | [Databinding] ObservableListTreeContentProvider adds the value passed to TreeViewer#setInput() to the known-elements |
239144 | [javadoc export] JavadocWizard#executeJavadocGeneration() mixes vmArgs and progArgs |
239156 | P2: Invalid private configuration area created |
239198 | [compiler] NegativeArraySizeException thrown for triple quotes |
239216 | NPE when launching launching Eclipse application |
239229 | [compiler] Regression bug against Eclipse 3.3: cannot resolve correct import |
239300 | [TabbedProperties] underline missing from tab label when tab has focus |
239305 | [compiler] VerifyError caused by casting long to long to int |
239317 | [Commands] NPE in ContributedAction.runWithEvent() |
239439 | [1.5][compiler] Behavior change for binding for parameterized type |
239442 | [breadcrumb] Drop down stays open on GTK after tool bar drop down menu opened |
239453 | Possible NPEs when accessing filtered text if filtered text preference turned off |
239482 | SWT.VIRTUAL Table Freezes under 3.4 when dragging (DND) |
239486 | ArrayIndexOutOfBoundsException in LoadTargetOperation#getVMInstall() |
239506 | [package explorer] Invalid dialog about deleting read-only elements when deleting a linked resource folder |
239523 | [TabbedProperties] Three JavaDoc warnings |
239647 | [build path] Add JARs... should filter JARs that are already on the build path |
239719 | [formatter] Code formatter destroys pre formatted javadoc comments |
239758 | [1.5][compiler] Generic interface inheritance and overriding error |
239940 | [implementation] NPE while editing a javadoc comment |
239941 | [formatter] Unclosed html tags make the formatter to produce incorrect outputs |
239972 | Doc Clarification / type references used |
239998 | Singleton checkbox removed for the "Standard" OSGi target |
240062 | Reformat/simplify resolver status messages |
240064 | [content assist] code completion appends unrelated content from editor |
240073 | [CommonNavigator] ISV guide doc corrections |
240128 | p2 unable to launch after SVN check-out of ide |
240137 | Minor typos in team_model.htm |
240151 | Minor typos in "Model Roadmap for Logical Model Integration" page |
240214 | [compiler] final bit should be cleared from class file access flag for anonymous class |
240286 | Problems encountered while deleting resources |
240381 | [Progress] NPE in org.eclipse.ui.workbench GroupInfo.java and JobTreeElement.java |
240387 | DVT34: broken link in documentation |
240390 | DVT34: broken link in documentation |
240391 | DVT34: broken link in documentation |
240392 | DVT34: broken link in documentation |
240393 | DVT34: broken link in documentation |
240396 | DVT34: broken link in documentation |
240397 | DVT34: broken link in documentation |
240398 | DVT34: broken link in documentation |
240399 | DVT34: broken link in documentation |
240500 | Java 6 Update 7 breaks OSGI over Webstart |
240565 | [Webapp] link to breadcrumbs.css does not work in (some) xhtml help docs |
240633 | Extension points missing in doc outline |
240686 | [formatter] Formatter do unexpected things |
240909 | [sec] Non-ASCII chars are not properly stored |
240915 | Eclipse startup fails when 2 equinox.launcher jars are in the installation dir |
240924 | NullPointerException when trying to open a file |
240931 | [DataBinding] NPE in JavaBeanObservable(Set|List).firstListenerAdded() |
240933 | CU attachment expensive due to large number of equal capabilities |
241062 | [consistency] Font#getFontData() not safe from non-ui thread on MacOS |
241081 | please increment version of org.eclipse.equinox.p2.user.ui feature to 1.0.1 |
241150 | Version are not canonicalized when loading from update site |
241185 | lots of log messages that look like problems, but which are not |
241193 | [implementation] ClipboardOperationAction does not dispose the allocated clipboard |
241209 | [Markers] [Problems View] Changing columns in the preferences makes errors disappear from the view |
241273 | [templates view] AbstractTemplatesPage leaks clipboards |
241289 | Fixes for artifact repository access (trailing slashes and synchronization) |
241345 | [formatter] Didn't Format HTML tags is unavailable |
241384 | [Markers] Cannot delete marker from in marker, problems, task or bookmarks view |
241574 | [ui] Restart question is misleading |
241632 | [KeyBindings] Emacs Binding not visible |
241671 | Mouse cursor disappears in editor and gets progressively slower coming back |
241687 | [formatter] problem formatting block comments |
241770 | StateHelper.getUnsatisfiedLeaves() behaviour changed from 3.2 |
241845 | [ui] UI code should check CANCEL status and OperationCanceledException |
242038 | 'Organize Manifests' wizard has conflicting mnemonics |
242069 | [package explorer] Filter for empty package doesn't work |
242366 | [render] 'Java > Appearance > Compress all package name segments' fails for '0' |
242394 | Arithmetic exception in AbstractColumnLayout |
242436 | [p2] metadata generator creates problematic configUrl entry in config.ini |
242443 | Maintenance build version numbers need updating |
242539 | [Doc] 2 Help pages don't mention that CVS passwords are kept now by Secure Storage |
242561 | URLStreamHandlerProxy does not delegate new Java 5 method: openConnection(URL u, Proxy p); |
242582 | [MPE] Ctrl+S in MPEP: different behaviour in 3.3 and 3.4 |
242603 | Solaris crash: symbol gnome_icon_theme_new: referenced symbol not found |
242632 | Eclipse won't start as non-root user when it is installed in two sites as root. |
242644 | eclipse crashes when downloading a file in the internal browser |
242646 | deadlock on org.eclipse.jdt.internal.core.ExternalFoldersManager |
242741 | [ui] version of org.eclipse.equinox.p2.ui.sdk in the 3.4.x stream needs to be updated |
242762 | [common navigator] newly created project disappears in Project Explorer |
242879 | org.eclipse.team.core.projectSets extension point deprecated - forward ref invalid |
242900 | [Markers] (3.4 maint.) Test failure in MarkersViewColumnSizeTest.testColumnRestore |
242933 | [1.5] NullPointerException for @Range(min=1, max=9999999999999999) |
243012 | Password fields can be copied to the clipboard on Mac OS X |
243064 | [Help][Mac OS X] The background color of selected print menu is too dark. |
243132 | PackagesViewContentProviderTests2.testAddCUFromPackageNotLogicalPackage fails sometimes |
243210 | [KeyBindings] AWT Text fields no longer receive delete key pressed event in workbench |
243266 | [implementation] Don't set clipboard if textData is null in ClipboardOperationAction.doCutCopyWithImportsOperation() |
243346 | [common navigator] Adding sub-package in hierarchical mode is added twice |
243399 | [breadcrumb] Should not redraw when caret moved in same element |
243405 | [hovering] Typo in dialog from Problem hover |
243422 | Feature with empty required version incorrectly converted to [0.0.0,1.0.0) |
243466 | [CommonNavigator] documentation missing about how to configure linkHelper |
243467 | Doc Clarification / "action to enable" |
243606 | [Debug View] Stackframe does not get focus with multiple debug targets |
243773 | Test failure in M20080808 |
243842 | Solaris crash: symbol gnome_icon_theme_new: referenced symbol not found |
244013 | [Metadata] Branched org.eclipse.ui should have version 3.4.1 |
244020 | [hovering] Rich Problem Hover > Configure Problem Severity asks about project-specific settings too often |
244038 | Doc Clarification / used for, used from |
244098 | [DataBinding] ListBinding does not update from model to target in some cases |
244108 | [WorkbenchLauncher] ArrayIndexOutOfBoundsException in IDEApplication.start() when launching partially branded product |
244148 | [About] (maintenance) Looking at Help->Plugins and then closing produces many errors |
244171 | [ActivityMgmt] (maintenance) NPE in org.eclipse.ui.internal.activities.Identifer prevents menu contributions from showing up |
244322 | "org.eclipse.platform" plugin version smaller in Eclipse 3.4.1 |
244396 | [DND] Combo on Linux does not fire DragSourceEvent. |
244428 | [ActivityMgmt] (maintenance) Endless loop in MutableActivityManager.getIdentifier(..) |
244500 | /eclipse/updates/3.4 has wrong mirrors URL |
244514 | [package explorer] PackageExplorerContentProvider.executeRunnables(Collection) might change event order |
244574 | ProgressBar state can be visually lost by updating selection |
244610 | [CommonNavigator] tests - test file not correctly closed, causes exception in tearDown |
244615 | Use BundleContext.getProperty(...) instead of System.getProperty(...) |
244616 | Reduce severity when logging SiteEntry without plugins dir |
244630 | Unable to invoke product as non-root user after applying product patches. |
244631 | [Markers] Problems view cache is too large for very large marker sets |
244716 | code generation at Insertion point option not being preserved |
244754 | [PropertiesDialog] propertyPages extension point does not allow forcePluginActivation when using core.expression's property tester |
245125 | [Trim] Cheese when calling Shell#layout() on invisible Shell in RCP |
245159 | [Preferences] Preference pages not scrollable (accessible) via keyboard |
245165 | USER-INCLUDE Sites are filtering out generation of feature and group IUs |
245183 | [Databinding] ObservableList could do a == check before delegating to the wrapped list |
245185 | Message in the MessaeBox is not BiDi correctly |
245206 | [CommonNavigator] Add test code for dependsOn with overrides in actionProvider |
245271 | Change PackageAdminImpl.doResolveBundles to protected |
245411 | Increment org.eclipse.sdk and org.eclipse.help feature versions in 3_4_maintenance |
245554 | Cannot find and read bundle.info in a shared install |
245575 | Contents of org.eclipse.cvs changed but version did not between 3.4 GM and 3.4.1 20080827 |
245746 | NPE org.eclipse.jdt.apt.core.internal.env.BaseProcessorEnv:491 |
246133 | plug-in and fragment versions need updating for 3.4.1 |
246310 | Shared-mode reconciliation is sensitive to repository caches search order |
246432 | BundleInfo equals/hashCode mismatch |
247052 | Declare 3.4.1 RC3 |
Sun, Solaris, Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.
IBM is a trademark of International Business Machines Corporation in the United States, other countries, or both.
Microsoft, Windows, Windows NT, Vista, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.
Apple and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
QNX, Neutrino, and Photon are trademarks or registered trademarks of QNX Software Systems Ltd.
Other company, product, and service names may be trademarks or service marks of others.
(c) Copyright IBM Corp. and others 2008
In the table below, the "3.4 EE" ("3.4 Execution Environment") column indicates the minimum Java class library requirements of each plug-in for the 3.4 release, where the value is one of:
Entry | Meaning |
M1.0
|
OSGi Minimum Execution Environment 1.0 - This is a subset of the J2ME Foundation class libraries defined by OSGi to be the base for framework implementations. See the OSGi specification for more details. |
M1.1
|
OSGi Minimum Execution Environment 1.1 - This is a subset of the J2ME Foundation class libraries defined by OSGi to be the base for framework implementations. See the OSGi specification for more details. |
F1.0
|
J2ME Foundation 1.0 - indicates that the plug-in can only be run on Foundation 1.0 or greater. Note that with the exception of some MicroEdition IO classes, Foundation 1.0 is a subset of J2SE 1.3. |
F1.1
|
J2ME Foundation 1.1 - indicates that the plug-in can only be run on Foundation 1.1 or greater. Note that with the exception of some MicroEdition IO classes, Foundation 1.1 is a subset of J2SE 1.4. |
1.2
|
J2SE 1.2 - indicates that the plug-in can only be run on JSE 1.2 or greater. |
1.3
|
J2SE 1.3 - indicates that the plug-in can only be run on JSE 1.3 or greater. |
1.4
|
J2SE 1.4 - indicates that the plug-in can only be run on JSE 1.4 or greater. |
1.4/1.5
|
Indicates that the plug-in can run on JSE 1.4 or greater, but provides enhanced functionality when run on J2SE 5.0. |
1.5
|
J2SE 5.0 - indicates that the plug-in can only be run on JSE 5.0 or greater. |
1.6
|
J2SE 6.0 - indicates that the plug-in can only be run on JSE 6.0 or greater. |
n/a | Not applicable (for example plug-ins that do not contain Java code) |
Plug-in | 3.4 |
javax.servlet | F1.0 |
javax.servlet.jsp | F1.0 |
org.apache.ant | 1.2 |
org.apache.commons.el | F1.0 |
org.apache.commons.logging | F1.0 |
org.apache.jasper | F1.0 |
org.apache.lucene | n/a |
org.eclipse.ant.core | 1.4 |
org.eclipse.ant.ui | 1.4 |
org.eclipse.compare | n/a |
org.eclipse.core.boot | F1.0 |
org.eclipse.core.commands | F1.0 |
org.eclipse.core.contenttype | F1.0 |
org.eclipse.core.expressions | F1.0 |
org.eclipse.core.filebuffers | 1.4 |
org.eclipse.core.filesystem | 1.4 |
org.eclipse.core.jobs | F1.0 |
org.eclipse.core.net | 1.4 |
org.eclipse.core.resources | 1.4 |
org.eclipse.core.resources.compatibility | 1.4 |
org.eclipse.core.runtime | F1.0 |
org.eclipse.core.runtime.compatibility | 1.4 |
org.eclipse.core.runtime.compatibility.auth | F1.0 |
org.eclipse.core.runtime.compatibility.registry | F1.0 |
org.eclipse.core.variables | 1.4 |
org.eclipse.debug.core | 1.4 |
org.eclipse.debug.ui | 1.4 |
org.eclipse.equinox.app | F1.0 |
org.eclipse.equinox.common | F1.0 |
org.eclipse.equinox.http.jetty | F1.0 |
org.eclipse.equinox.http.servlet | F1.0 |
org.eclipse.equinox.http.registry | F1.0 |
org.eclipse.equinox.jsp.jasper | F1.0 |
org.eclipse.equinox.jsp.jasper.registry | F1.0 |
org.eclipse.equinox.launcher | F1.0 |
org.eclipse.equinox.preferences | F1.0 |
org.eclipse.equinox.registry | F1.0 |
org.eclipse.help | 1.4 |
org.eclipse.help.appserver | 1.4 |
org.eclipse.help.base | 1.4 |
org.eclipse.help.ui | 1.4 |
org.eclipse.help.webapp | 1.4 |
org.eclipse.jdt | 1.4 |
org.eclipse.jdt.apt.core | 1.5 |
org.eclipse.jdt.apt.ui | 1.5 |
org.eclipse.jdt.compiler.apt | 1.6 |
org.eclipse.jdt.compiler.tool | 1.6 |
org.eclipse.jdt.core | 1.4 |
org.eclipse.jdt.core.manipulation | 1.4 |
org.eclipse.jdt.debug | 1.4 |
org.eclipse.jdt.debug.ui | 1.4 |
org.eclipse.jdt.doc.isv | n/a |
org.eclipse.jdt.doc.user | n/a |
org.eclipse.jdt.junit | 1.4 |
org.eclipse.jdt.junit.runtime | 1.4 |
org.eclipse.jdt.junit4.runtime | 1.5 |
org.eclipse.jdt.launching | 1.4 |
org.eclipse.jdt.source | n/a |
org.eclipse.jdt.ui | 1.4 |
org.eclipse.jface | F1.0 |
org.eclipse.jface.text | 1.4 |
org.eclipse.jsch.core | 1.4 |
org.eclipse.jsch.ui | 1.4 |
org.eclipse.ltk.core.refactoring | 1.4 |
org.eclipse.ltk.ui.refactoring | 1.4 |
org.eclipse.osgi (system.bundle) | M1.0 |
org.eclipse.osgi.services | M1.0 |
org.eclipse.osgi.util | M1.0 |
org.eclipse.pde | 1.4 |
org.eclipse.pde.build | 1.4 |
org.eclipse.pde.core | 1.4 |
org.eclipse.pde.doc.user | n/a |
org.eclipse.pde.junit.runtime | 1.4 |
org.eclipse.pde.runtime | 1.4 |
org.eclipse.pde.source | n/a |
org.eclipse.pde.ui | 1.4 |
org.eclipse.pde.ui.templates | 1.4 |
org.eclipse.platform | F1.0 |
org.eclipse.platform.doc.isv | n/a |
org.eclipse.platform.doc.user | n/a |
org.eclipse.platform.source | n/a |
org.eclipse.platform.source.* | n/a |
org.eclipse.rcp | F1.0 |
org.eclipse.rcp.source | n/a |
org.eclipse.rcp.source.* | n/a |
org.eclipse.sdk | n/a |
org.eclipse.search | 1.4 |
org.eclipse.swt | M1.0 |
org.eclipse.swt.* | M1.0 |
org.eclipse.team.core | 1.4 |
org.eclipse.team.cvs.core | 1.4 |
org.eclipse.team.cvs.ssh | 1.4 |
org.eclipse.team.cvs.ssh2 | 1.4 |
org.eclipse.team.cvs.ui | 1.4 |
org.eclipse.team.ui | 1.4 |
org.eclipse.text | 1.4 |
org.eclipse.tomcat | n/a |
org.eclipse.ui | F1.0 |
org.eclipse.ui.browser | 1.4 |
org.eclipse.ui.cheatsheets | 1.4 |
org.eclipse.ui.console | 1.4 |
org.eclipse.ui.editors | 1.4 |
org.eclipse.ui.externaltools | 1.4 |
org.eclipse.ui.forms | 1.4 |
org.eclipse.ui.ide | 1.4 |
org.eclipse.ui.intro | 1.4 |
org.eclipse.ui.intro.universal | 1.4 |
org.eclipse.ui.navigator | 1.4 |
org.eclipse.ui.navigator.resources | 1.4 |
org.eclipse.ui.net | 1.4 |
org.eclipse.ui.presentations.r21 | 1.4 |
org.eclipse.ui.views | 1.4 |
org.eclipse.ui.win32 | 1.4 |
org.eclipse.ui.workbench | F1.0 |
org.eclipse.ui.workbench.compatibility | 1.4 |
org.eclipse.ui.workbench.texteditor | 1.4 |
org.eclipse.update.configurator | F1.0 |
org.eclipse.update.core | F1.0 |
org.eclipse.update.core.linux | F1.0 |
org.eclipse.update.core.win32 | F1.0 |
org.eclipse.update.scheduler | F1.0 |
org.eclipse.update.ui | F1.0 |
org.junit (old) | 1.4 |
org.junit (JUnit4) | 1.5 |
org.mortbay.jetty | F1.0 |