Check Out - prompts

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

Scenario 1

1. Select a project in HEAD
2. Perform a Checkout
3. Ensure project was checked out properly
4. Select the same project and choose Checkout As
5. Use the same name and specify a custom location
6. Ensure that the user is prompted to overwrite
7. Ensure OK and Cancel have proper behavior

Scenario 2

1. Select a project in HEAD
2. Perform a Checkout
3. Ensure project was checked out properly
4. Delete the project but leave the contents on disk
5. Perform a Checkout of the same project again
6. Ensure that the user is prompted to overwrite
7. Ensure OK and Cancel have proper behavior

Scenario 3

1. Select a project in HEAD
2. Perform a Checkout As
3. Use the same name and specify a custom location
4. Ensure project was checked out properly
5. Delete the project but leave the contents on disk
6. Perform a Checkout As of the same project to the same location as in step 3
7. Ensure that the user is prompted to overwrite
8. Ensure OK and Cancel have proper behavior

Scenario 4

1. Select a project in HEAD
2. Perform a Checkout As
3. Use the same name and specify a custom location
4. Ensure project was checked out properly
5. Delete the project but leave the contents on disk
6. Perform a Checkout on the project
7. Ensure project was checked out properly
8. Perform a Checkout As of the same project to the same location as in step 3
9. Ensure that the user is prompted twice: once to overwrite project and once to overwrite custom location
10. Ensure OK and Cancel have proper behavior

Checkout Wizard

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

The checkout wizard should be available from the following parts of the workbench: import, new project, empty workspace CVS synchronize action, toolbar in CVS perspective. The checkout wiard is also available from the context menu of the repositories view as the Checkout As menu item.

The following variants should be tested:

• Create a new repository location and checkout a project entirely from the wizard.
• Check out a tag
• Check out a project that does not contain a .project file. This should result in a second wizard that allows projct configuration (e.g. Java project).

Repositories View Checkout Variants

1. Perform "Check Out" on a single project. Ensure that repeating results in overwrite prompt.
2. Perform "Check Out" on multiple projects.
3. Perform "Check Out As..." on a single project (that contains a .project file) and enter custom name and/or custom location.
4. Perform "Check Out As..." on a single remote project that does not have a .project file and ensure that the user is prompted for the project type to create.
5. Perform "Check Out As..." on multipe projects and enter a custom parent location.
6. Perform "Check Out As..." and specify a tag.

Tags

Since: 3.0
Last Modified: $Date: 2007/03/19 16:12:46 $

Refresh Branches and Versions

1. Select a repository location and perform "Refresh Branches and Versions...".
2. Select one or more projects that contain a .project file and have been tagged with branch and version tags and click finish.
3. Expand the respository entry to view ...
   • projects in HEAD,
   • branches and projects in BRANCHES,
   • projects and versions in VERSIONS.

Configure Branches and Versions

1. Select a project in the repositories view and perform "Configure Branches and Versions...".
2. Select some branch and version tags to be remembered.
3. Expand the respository entry to view ...
   • projects in HEAD,
   • branches and projects in BRANCHES,
   • projects and versions in VERSIONS.

Date Tags

• Repositories view
• Configure Branches and Versions dialog
• Tag selection dialogs (Compare with and Replace with Branch or Version)

Sharing

Sharing as a subfolder

Since: 3.0 M6
Last Modified: $Date: 2007/03/19 16:12:46 $

Perform the following steps:

1. Create a new project
2. Select Team>Share
3. Select a repository and click next
4. Enter a path with at least two segments as the remote module name
5. Click Finish

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Single select a project and select share.

• Should only be available if the project is not shared.
• Menu item should be available from the Project top level menu.
• Wizard should allow you to cancel at any time and un-map the project. Note that some resources may of been committed via the wizard that will remain committed.
• Should be able to share as a repository root {".") or a folder at any level (i.e. a folder name with one or more paths).

Reconnecting an existing project

Since: 3.0 M6
Last Modified: $Date: 2007/03/19 16:12:46 $

The following scenario represents how a user would reconnect a project that does not contain CVS meta-data to it's remote counterpart. It is assumed that the local project was derived from a previous version of the remote project but both the local project and the remote may have been modified since then.

Scenario 1: Existing location using project name

Perform the following steps:

1. Load an existing project (using Checkout or you could import a plug-in project from the target area)
2. Disconnect the project and indicate that CVS meta-data is to be deleted
3. Modify some local resources
4. Optionally, modify the remote contents of some resources using a separate checkout
5. Perform a Team>Share Project and select CVS (if there is more than one repository provider available).
6. Select the repository the project was loaded from and click Next.
7. Use the project name as the module name. Click Next.
8. In the tag page, select HEAD as the branch to share with and click Next
9. In the sharing page, only the files that do not have the same contents as the server should appear. Perform a Mark as Merged or Commit on these files.
10. Click Finish.

Scenario 1: New location using curstom module name

Perform the following steps:

1. Load an existing project using Checkout As and a different name
2. Disconnect the project and indicate that CVS meta-data is to be deleted
3. Discard the repository location
5. Modify some local resources
6. Optionally, modify the remote contents of some resources using a separate checkout
7. Perform a Team>Share Project and select CVS (if there is more than one repository provider available).
8. Select to create a new repository and click Next
9. Enter the repository information for the repository and click Next
10. Enter the name of the module that the project was loaded from. Click Next.
11. In the tag page, select HEAD as the branch to share with and click Next
12. In the sharing page, only the files that do not have the same contents as the server should appear. Perform a Mark as Merged or Commit on these files.
13. Click Finish.

Sharing a new project

Since: 3.0 M8
Last Modified: $Date: 2007/03/19 16:12:46 $

Scenario 1: Existing location using project name

Perform the following steps:

1. Create a new project that does not exist in the repository
2. Select Team>Share and select CVS (if there is more than one repository provider available).
3. Select a repository and click Next
4. Use the project name as the module name. Click Next.
5. After a time, the last page should show the outgoing changes in the project. Commit the changes from the synchronize pane.
6. Click Finish

Scenario 2: New location using different name

Perform the following steps:

1. Create a new project
2. Select Team>Share and select CVS (if there is more than one repository provider available).
3. Select to create a new repository and click Next
4. Enter the repository information for a new repository and click Next
5. Enter a single segment module name that does not exist in the repository and click Next.
6. After a time, the last page should show the outgoing changes in the project. Commit the changes from the synchronize pane.
7. Click Finish

Project Sets

Since: 2.1
Last Modified: $Date: 2007/03/19 16:12:46 $

• Create a project set from a workspace with multiple projects shared with CVS. The shared projects in the workspace should include projects shared with the following: branch, version, date, and HEAD.
• Start with an empty workspace and import the projects using the import projects sets wizard.
• You should be prompted for a password and username for the locations.
• Ensure that the projects are checked out correctly and against the correct tag.

Replacing

With latest

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Ensure that replace srubs the local resources leaving to outgoing changes. And verify the following:

With another branch of version

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Check the following for all cases of replace:

• decorators are updated in the navigator/packages view and synchronize view.
• if a version is loaded that you can't commit to it
• if a branch is loaded, that you can commit to it.

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

• If the file isn't managed the action should no appear.
• If the file doesn't have any revisions you should be prompted
• If the file has revisions you should be prompted with the list of revisions in a compare dialog
• In the compare dialog you can select any revision and compare changes but merging isn't supported
• If a revision is selected the Replace button should be enabled. Otherwise it should be disabled
• If you selected the replace button the file should contain the contents of the revision selected. The dialog will also close.
• Ensure that the titles are ok (e.g. dialog title, structure pane title...)

Updating

Since: 2.0
Last Modified: $Date: 2007/03/19 16:12:46 $

You can run an update and open the console to see the files that are being updated.

You can run the update and switch to another branch, this should keep your outgoing changes and update all other non-changed files.

Comparing

Remote resources

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

Compare With... in Repositories view

Perform the following steps:

1. Select a project in HEAD and choose Compare With... from context menu
2. Select a branch tag
3. Ensure result of comparison is correct
4. Repeat and in step 2) use a version tag

Repeat the above steps for a project in a branch and a project version.

Repeat the above steps for a selected folder and a selected file.

Compare on two selections in Repositories view

Perform the following steps:

1. Select a project in HEAD
2. CTRL-select a project in a branch
3. Choose Compare from context menu
4. Ensure result of comparison is correct

Repeat the above for various conbinations (branch + version, version + branch, branch + branch, version + version).

Repeat the above steps for a selected folder and a selected file.

Compare on two selections in Resource History view.

Perform the following steps:

• Open Resource History view on a file with multiple revisions
• Select 2 and choose Compare from the context menu
• Ensure result of comparison is correct

Compare with another branch or version

Since: M8
Last Modified: $Date: 2007/03/19 16:12:46 $

You should be able to select a project/folder/resource and compare againts another branch or version. Multi-select should work across projects in different repositories. Once the comparison is shown it should be possible to merge changes into the local workspace. It should also be possible to remember the comparison, which will cause it to appear in the synchronize view.

We should support multi-selection of files, but I'm not sure what should be shown to the user in those cases.

On file selected

• If the file has differences open a compare editor and show otherwise a message is shown to indicate that the file is the same.
• should be able to open the history view and link in to the opened compare editor
• the compare editor should update when changes are made to the local file in some other context (e.g other editor, refactoring).

Multiple selection

Entire contents of the folder are compared deep. If changes are found the user is notified and they are shown in a dialog. If no changes are found the user is notified. The dialog should allow the user to browse the changes and merge anything into his workspace. If the user wants to keep the comparison non-model, he can add it to the synchronize view. There is a button to do so on the compare dialog.

Merging changes

When the compare dialog is showing several changes you should be able to selectively merge anything into the local workspace. Specific attention should be made to the following cases:

• Edit the local then press ok. You should be prompted to save the changes and the changes should be correctly updated in the corresponding resource.
• Edit the local and browse to another file. You should be prompted to save the changes.
• Press the cancel button with changes, you should be prompted.

Reverting deleted resources

Since: M8
Last Modified: $Date: 2007/03/19 16:12:46 $

Quick Diff

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Enable CVS quick diff for text and java files via the Workbench > Editors > QuickDiff preference. Then try the following scenarios.

1. Open a file and make changes to it. You will see the quickdiff annotations marking the changes. Next, run Team > Replace with latest. The annotations are removed and the file is clean.
2. same as 1 but this time instead commit the file. The quickdiff annotations are removed and the file is clean.
3. checkout two copies of the same project. Open file1 from both projects. Make changes to file1 in project1 and commit the change. Synchronize project2 and file1 from project1 will show the quickdiff annotations for the new incoming changes.
4. same as previous but this time actually update the file. The files quickdiff annotations are removed and the file is clean.

Synchronizing

Performing a Synchronize

Since: 3.0
Last Modified: $Date: 2007/03/19 16:12:46 $

Synchronizing means to compare your local workspace contents with the contents in another location with the goal that the two locations should contain the same contents at some point.

Performing a Synchronize operation

There are a few ways of launching a synchronize operation. They all open the same dialog but the initial selection is affected by where the operation is launched. Here is the list of ways to start a synchronize along with the expected initial selection.

• Using the global synchronize action (via toolbar or keybinding): The selection should be obtained from the active view. If no view is active, all projects should be selected.
• Using the Synchronize button in toolbar of the Synchronize view: All projects should be selected.
• Selecting Synchronize from the context menu of resources in the synchronize view: The selection should match what was selected when the menu was selected.
• Selecting Team > Synchronize with Repository from the context menu of any resource based view: The selection should match what was selected when the menu was selected.

Once launched, a synchronize will run in the background. Currently, the user is prompted to switch perspectives when the synchronize is launched. When a synchronize completes, the user is prompted either with a dialog stating there is no changes or one that contains a details area that shows the incoming changes. The user is given the option to supress the post-synchronize dialog.

Notice a file is out-of-sync in another view (e.g. packages explorer, types) and want to see the changes

In case you can select a file, it will be refreshed with the server, and if changes are found the compare editor is opened that will allow browsing the changes. If no changes are found, you will be prompted.

From another view would like to browse the outgoing/incoming changes for several resources

Select a folder or group of files and Team > Synchronize will open the sync view and automatically refresh with the remote repository.

In the sync view and would like to refresh to see if there are new changes from the server

Synchronize View

Since: 3.0
Last Modified: $Date: 2007/03/19 16:12:46 $

Synchronize View Modes

Ensure that choosing direction modes result in proper filtering.

• Incoming mode contains incoming changes and conflicts.
• Outgoing mode contains outgoing changes and conflicts.
• Both mode contains all change types.
• Conflict mode contains only conflicts.

Also ensure that there are no empty containers (e.g folders or projects) in any of the modes.

Synchronize View Models

Ensure that each model contains the appropriate output. Models to test include:

• All Models: Projects should contain content from the highest level model (e.g. Java projects contains Java content like packages while non-Java projects contains folders).
• Workspace: All projects are shown and contain folders. For this model, also test the presentation types (Flat, Hierarchical and Compressed Folders).
• Java: Only Java projects are present and contain Jva content (e.g. packages). Also ensure that any resource content is present (e.g. non-source folders).
• Change Sets: All changes are grouped by change set.

Also ensure that mode switching works properly for each model type.

Synchronize View Operations

Ensure Commit and Update buttons:

• operate on all applicable changes
• prompt in some form before executing

Ensure Update menu action:

• is enabled when selection contains incoming or conflicting changes
• operates only on selected changes
• silently handles mergable conflicts
• will prompt if conflicts are not mergable

Ensure Commit menu action

• is enable when selection contains outgoing changes
• prompts for unadded resources
• operates only on selected changes

Ensure Override and Update

• is enabled for outgoing and conflicting changes
• prompts to confirm
• operates only on selected changes

Ensure Override and Update

• is enabled for outgoing and conflicting changes
• prompts to confirm
• operates only on selected changes

Ensure Mark as Merged

• is enabled for incoming and conflicting changes
• operates only on selected changes

Ensure Refresh button refreshes all projects regardless of mode, selection or working set.

Ensure Refresh menu action refreshes only the selection

All actions on large sets

Decorations

Since: M8
Last Modified: $Date: 2007/03/19 16:12:46 $

Conflicts

Conflicting changes should be propagated to parent resources such that you can easily see, when the tree is collapsed that there are conflicts. When the conflict is resolved, the parent conflict markers should be removed.

Error and Warning problem markers

Error and warning makers are shown on resources and propagated to parent resources such that you can easily see if you are releasing errors or warnings.

Branch changes

Changes to branches, revisions, should be updated automatically in the views decorators. For example, if you branch from the sync view the branch name should appear.

Change Sets Layout

Since: 3.1 M2
Last Modified: $Date: 2007/03/19 16:12:46 $

Change Sets for incoming changes

Enabling/disabling Change Sets

1. Synchronize the projects with HEAD, enable change set mode and ensure that the files appear in the proper change sets. Also ensure that the proper sub-layout is used by expanding some of the nodes in the tree.

2. With some nodes expanded and additionally one or more selected, disable Change Sets. The same nodes should remain expanded and selected.

3. With the same nodes selected and expanded, re-enable change sets. The expansion should remain. There may be more expanded if the same expanded project or folder appears in multiple change sets. The selection will remain unless there are two entries for the same resource (i.e. if a project was selected and it apears in multiple sets, it will no longer be expanded).

Change Set Layouts

Change Set Modes

1. Switch between the various modes and ensure that the displayed nodes are correct. Also ensure that expansion and seleciton is maintained.
2. Only Incomign and Outgoing mode shw change sets.

Updating

Outgoing Sets

1. Modified files can be added to a new or existing change set. Ensure that when they are added, he file remains visible in the Sync view.
2. Files in a change set can be transfered to another change set
3. If there is a default change set, any modified file that is not already part of a change set is placed in the default set. Files that are already in a set should stay in that set if more changes are made to the files.
4. The title and comment of a change set can be changed.
5. Layout and modes changes work properly for outgoing change sets in the Synchronize view.
6. ing one or more files in a change set will result in a commit dialog that is primed with the comment from the set.
7. change sets (including which is the default), are preserved accross restarts.

Scenarios

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Making Manual Changes

Create a conflicting file change. Manually edit the left source pane in the sync view. Hit "Save" on the popup menu. The file should remain a Conflict. Choose Mark as Merged in the popup menu of the tree. The file should change to an outgoing change. Commit the outgoing change.

Merging Conflicts

Try Override and Update with different combinations of Auto-Mergeable and Non-Mergeable conflicts in the selection. If all conflicts are Non-Mergeable, then the only choice is to replace with remote or cancel. If one or more conflicts are Auto-Mergeable, the choices are (a) Auto-Merge any applicable files, and replace the rest with remote, (b) Replace all files with remote or (c) Cancel.

Removing from View

Choose Remove from View. Selected nodes should disappear. Refresh the view. The nodes should reappear.

Working with Branches

Try any and all of the above, but use a branch instead of HEAD. Behaviour should be identical. The sync view decorator should show you the name of the branch.

Using Mixed Tags

Using Team->Branch, Replace With->Branch or Version, and Team->Tag as Version, you can create a project which has different tags mixed into it. For example, one folder may be shared as V2_0, a single file may be attached to the branch NEW_FEATURE_BRANCH, and the root of the project may be attached to HEAD. We need to test usage of these projects in the sync view. For example, if developer 1 has project P shared with HEAD, and folder P/F is shared with branch B, have developer 2 release a change to folder F in HEAD, and have developer 1 perform a sync. In this case developer 1 should not see the incoming change.

Restart Behavior

Since: 3.3
Last Modified: $Date: 2007/03/19 16:12:46 $

Synchronization Restart Behavior

1. Create a CVS synchronization of each persisted type (Workspace and Merge).
2. Restart and see the page that allwos you to populat or restart.
3. Choose to remember the operation
4. Pick an operation and ensure that the behavior is respected

Commit

Committing Changes

Since: 3.1 M4
Last Modified: $Date: 2007/03/19 16:12:46 $

Commiting changes to existing files

1. Edit some existing files in a CVS project
2. Choose Team>Commit on the project from the Navigator
3. The commit dialog should show a preview of the files that are to be committed and allow a commit comment to be entered.

Some things to try:

• Committing a project (or selected resources) that contain no changes will prompt to indicate this.
• Files can be removed from the preview area and these will be excluded from the commit.
• Clicking OK without entering a comment should prompt.
• Emptying the preview area will disable the Finish and show a "no changes" message.
• Try different page layouts (compressed, tree and flat)

Commiting new files

1. Add a few new files to a project including some with unknown extensions and some with no extensions.
2. Choose Team>Commit on the project from the Navigator
3. The first page of the commit wizard will allow you to configure the file types for any new files whose content type cannot be determined.
   • Configure some to be remembered and others to be only applied to this commit (verify after that this was done properly)
4. Click Next and verify that the content type was determined properly.
5. Choose to ignore one of the files and verify that the file is removed and the .cvsignore appears.

Commiting files contained in a Change Set

1. From the Synchronize view, select all the changes from the same Change Set.
2. Choose Commit and verify that the comment in the commit dialog is the one from the change Set.

Tags

Tag Selection in Dialogs

Since: 3.1 M4
Last Modified: $Date: 2007/03/19 16:12:46 $

• Replace with Branch or Version
• Compare with Branch or Version
• Share of existing project
• Switch to Another Branch or Versions
• Tag with Existing
• Tag as Version

In each of these places, typing in the tag text field will filter the list of shown tags. The option to Refresh and Configure tags should also be present. Refreshing behavior should be as follows:

1. If an auto-refresh file (.project by default) exists and has tags, the tags are obtained from the file.
2. If there is no auto-refresh file, the log command is used to determine if there are any tags in the files that are direct children of the remote folder.
3. If no tags are found, the user is prompted to either perform a deep log to find any tags or configure the tags manually.

Tag Caching

Since: 3.1 M4
Last Modified: $Date: 2007/03/19 16:12:46 $

1. Tags discovered for local resources are cached with the rmeote folder that the resource's project is mapped to.
2. Tags discovered for remote resources are cached with the resource if it is a folder or the resource's parent if it is a file.

1. Perform Compare With on folders and subfolders in the repositories view. The first time, you will need to perform a Refresh \ but subsequent times, the tags should be cached.
2. Load non-root folders as projects and ensure tags are cached and obtained properly.
3. Perform Tag with Existing in the History view and ensure that tags are obtained from the file

Branch/Merge

Performing a Merge

Since: 3.1
Last Modified: $Date: 2007/03/19 16:12:46 $

Scenario 1: One Time Merge

Using Team>Merge, merge the changes from a branch into HEAD. Once completed, in the synchronize view, update the incoming changes, resolve any conflicts and ensure they worked, After updating, redo the same merge. A no-changes dialog should be presented since the local contents match the end-point.

Things to try:

• Use content assist to select an existing branch for the end tag. A root versions should ne automatically found if it exists.
• Choose to perform the merge into the local workspace. Ensure it works with and without a start tag.

Scenario 2: Ongoing Merge

Scenario 3: Direct Merge

Removing a Merge

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

Branching

Since: 3.1 M4
Last Modified: $Date: 2007/03/19 16:12:46 $

1. Choose Team>Branch from the context menu of the Navigator.
2. Enter a branch tag.
3. Verify that a version tag is proposed for the branch
4. Click OK and verify that the tags are applied and the local project is mapped to the branch

Some things to try:

• Uncheck the "start working on branch" option and verify that the local project is not moved to the branch.
• Branch a loaded version and verify that the tag from the project is used as the root.
• Ensure that the content assist on the branch text widget shows branches from other projects in the workspace that do not exist on the project being branched.
• Branch with local changes and ensurethat they remain and can be committed to the branch

Patching

Importing a zip over a shared project

Since: 3.0 M6
Last Modified: $Date: 2007/03/19 16:12:46 $

This scenario captures one means of patching. It assumes that a zip file contains a previous version of a project that has been modified in some way and added to a zip archive (without CVS directories).

Perform the following steps:

1. Load the project from CVS (using Checkout or some other means)
2. Import the zip over the loaded project.
3. Ensure that the sync states are Outgoing for all resources from the zip file.
4. Ensure that all folders from the zip file (except new ones) are marked as in-sync and all files (except new ones) are outgoing changes.
5. Changing the comparison criteria to compare contents should not contact the server and should leave only the resources that differ in the sync view. Perform a Mark As Merged and a Commit on these resources.
6. Changing the comparison criteria back to revision number will reveal all the files whose content did not change, perform a Mark as merged on these resources followed by a Team>Update on the project in the Navigator (Note: This could be handled better).
7. After the update, ensure the project has no out-of-sync resources.

History View

Editor Linking

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

1. Open the Resource History view and enable editor linking
2. Open a compare editor from the sync view (on a resource that exists remotely) and ensure that the history view updates.
3. Open an editor from the Repositories vew and ensure that the history view updates.
4. Open an editoron a local file and ensure that the history view updates.

Repeat the above with the Resource History view hidden and ensure that no revision history is fetched (i.e. no jobs appear in progress view).

Common Toolbar Buttons

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the functionality of the various buttons common to both the Local File History page and the CVS History page

Compare Mode

1. With a file history in the History View and the Compare Mode button off, click on any revision and verify that it opens that revision.
2. Click the Compare Mode button on and verify that clicking on any local file revision will now bring up the compare editor.
3. Verify that turning the Compare Mode button off again switches back to Open mode.

Collapse All

1. With a file history in the History View, and the Group by Date button on, click the Collapse All button.
2. Verify that all of the items in the tree are collapsed.

Group Revisions By Date

Group Revisions by Date

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the group by date mechanism for both local history and cvs history.

1. Open the History view.
2. Roll back your system clock 1 day, make a change to your local unmapped file and save it.
3. Roll back your system clock to the beginning of the month and make some changes to the local unmapped file and save it.
4. Roll back your system clock to anywhere before the beginning of the current month, make a change to the local unmapped file and save it.
5. Reset your clock to the current date and show the file's history (DND or [Team>Show Local History]/[Team>Show History] for local and CVS files respectively).
6. Verify that the revisions appear in the appropriate categories: Today, Yesterday, This Month and Previous.
7. Click the Group by Revisions Date button and make sure that the categories toggle on and off.

The above should be tested with history from both an unmanaged file and a CVS file.

Local History for Unshared Files

Drag and Drop Unmapped File

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the DND mechanism for unmapped files.

1. Open the History view.
2. Drag the local file over to it.
3. Ensure the the history view shows the appropriate history (i.e. all revisions present and proper filename in the title bar).

Drag another file over to the History View from a project that is shared with a CVS repository. Repeat the above and make sure that the View updates.

Show History Unmapped File

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the page activation mechanism for unmapped files.

1. Open the History view.
2. Select the local file, right click and select Team>Show Local History.
3. Ensure the the history view shows the appropriate history (i.e. all revisions present and proper filename in the title bar).

Populate the History View with another file from a project that is shared with a CVS repository. Repeat the above and make sure that the View updates.

CVS History

Drag and Drop CVS File

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the DND mechanism for CVS files.

1. Open the History view.
2. Drag the CVS file over to it.
3. Ensure the the history view shows the appropriate history (i.e. all revisions present and proper filename in the title bar).

Drag another file over to the History View from a project that is not shared with a CVS repository. Repeat the above and make sure that the View updates.

Annotate

Since: 3.0 M6
Last Modified: $Date: 2007/03/19 16:12:46 $

Annotate action should be available from

• history view, repo explorer, resource/packages view

Annotate java files

• should show the java editor
• you should be able to step through changes in the annotate view and the java editor should stay in sync (e.g. highlight) the changes associated with the selected change in the annotate view.
• you should also be able to select a line in the java file and the annotate view should select the change that is associated with that line.
• the history view should show the history for the opened file and highlight the revision of the currently selected change in the annotate view.

Annotate non-text editor files

• annotate plugin.xml file
• the default text editor should be shown
• you should also be able to select a line in the text file and the annotate view should select the change that is associated with that line.
• the history view should show the history for the opened file and highlight the revision of the currently selected change in the annotate view.

Annotate binary files

• annotate a file marked as binary
• the server should report an error that annotations cannot be shown for binary files.

Mode Switching

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the mode switching for the CVS History Page.

Basic Mode Testing

1. Open the History view.
2. Open any file that is being managed by CVS.
3. Edit the file and save.
4. Show the history for the file.
5. Click on the Local and Remote Revisions button. Verify that you can see both remote revisions and local revisions.
6. Click on the Local Revisions button. Verify that you can see only local revisions. Note: No background fetching should occur when you switch modes!
7. Click on the Remote Revisions button. Verify that you can see only remote revisions. Note: No background fetching should occur when you switch modes!

Mode Persistence Testing

1. Open the History view.
2. Show the history for the file.
3. Click on one of the modes, remember it and close the history view.
4. Show the history for a file again and verify that it is in fact the same mode that you had set prior to closing the history view.

Pin History View

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the pinning behaviour of the history view.

Simple Pinning

1. With a file history in the History View, hit the Pin button.
2. DND a file onto the pinned history view.
3. Verify that a new history view instance opens with the history of the new file displayed.
4. Drag another file onto the pinned instance and verify that it too goes to the new unpinned view.

More Pinning

If a one of the views already contains a file, that file should always update the pinned view.

1. With a file history in the History View, hit the Pin button.
2. DND a file onto the pinned history view.
3. Verify that a new history view instance opens with the history of the new file displayed.
4. Now show the history for the original file in the pinned view. The pin view should come to the fore front.

Refresh

Since: 3.2 RC2
Last Modified: $Date: 2007/03/19 16:12:46 $

Purpose: Test the two types of refresh behaviour available in the history view

Automatic Refresh

When a local file is modified and saved, a refresh event is sent out and the history view should show the newest revision. This will work for both local history and CVS history files. (CVS files need to have the history view in the appropriate viewing mode: either "Remote and Local Revisions" or "Local Revisions".)

1. With a file history in the History View, and the viewer in an appropriate mode if a CVS file, open an editor on the workspace copy of the file in the history view.
2. Edit the file and save.
3. Verify that a new local revision gets added to the history view which reflects your change.

Manual Refresh

There is also a Refresh button on the toolbar. This is mainly useful for CVS file histories if you want to check if any revisions have been committed. Note that its not really of any use for local revisions as they are updated automatically.

1. With a CVS file history in the History View, make a change to the file and save. (You should see the local version updated in the history view.)
2. Commit the file.
3. Hit the Refresh toolbar button and verify that the new revision gets displayed in the history view,

Concurrency

Close and disconnect

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

Background refresh and disconnect

1. Load several projects from the repository
2. Ensure that several have outgoing and incoming changes
3. Choose one project to disconnect. The project should have incoming and outgoing changes and be one of the later ones in the refresh order (alphebetical).
4. Perform a refresh on all the projects
5. While the refresh is occuring, disconnect the project chosen in step 3) and leave CVS folders.
6. Ensure that the project is removed from the sync view and no errors occur

Repeat the steps and purge the CVS meta-data in step 5).

Repeat the above steps but change the operation in step 5) to the following:

• close project
• project where server is unreachable
• delete project
• binary project import over source project with outgoing changes

Decoration and disconnect

• Load several projects from the repository
• Ensure that several have outgoing and incoming changes
• Choose one project to disconnect. The project should have incoming and outgoing changes and be one of the later ones in the refresh order (alphebetical).
• Turn on CVS decorators
• As the decorations are being calculated, disconnect all projects from CVS control.
• Ensure that the project is removed from the sync view and no errors occur

Repeat the above steps but change the operation in step 5) to the following:

• close project
• project where server is unreachable
• delete project
• binary project import over source project with outgoing changes
• delete or move files and folders (to test move/delete hook)

Restarting Workbench

Crash Recovery

Since: 3.0 M5
Last Modified: $Date: 2007/03/19 16:12:46 $

Scenario 1

1. Turn on deep dirty decoration
2. Dirty a file and ensure that the file and it's parents are dirty
3. Quit Eclipse so dirty state is persisted
4. Restart and perform an override and update or commit and ensure file and parents are clean
5. Kill Eclipse
6. Restart and ensure parents and file are clean

Scenario 2

1. Check out two copies of the same project
2. Dirty the same file in both projects, commit one and refresh the other in the sync view so a conflict is visible
3. Quit Eclipse so that the sync state is persisted
4. Restart Eclipse and perform an Override and Commit on the conflict
5. Kill Eclipse
6. Restart Eclipse and ensure that the sync view doesn't show the file (i.e the file is in-sync).

Synchronize View Settings

Since: 3.0 M6
Last Modified: $Date: 2007/03/19 16:12:46 $

Saved between sessions

The following GUI preferences in the Synchronize View are persisted between workbench sessions. Also they are persisted for each participant. You should be able to create a merge and workspace participant, then change the settings on each. Restart Eclipse and the settings should be maintained for each participant. The persisted settings are:

• mode
• layout
• working set

SSH2

Server version compatibiliity

Since: M6
Last Modified: $Date: 2007/03/19 16:12:46 $

Proxies

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Key Generation

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

• Generate keys and save private key without password. You should be prompted.
• Generate keys and save private key with password. You shouldn't be prompted.
• Generate keys and install using the sftp button.

General use

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

• Delete all files in your SSH_HOME directory. You can find this directory by opening the SSH2 preference page
• Create a CVS repository connection of type 'extssh'. You will be prompting about the server id not being in your known_hosts file.
• Select cancel, and error should be shown indicating that the location was not validated do you want to keep it.

Annotate

Show Annotation Action

Since: 3.0 M3
Last Modified: $Date: 2007/03/19 16:12:46 $

Annotate a non-managed file, binary file, plugin.xml file... Be creative.

Ensure that the annotate view, editor, and history view stay synched.

Label Decorations

Enablement at startup

Since: 3.0 M7
Last Modified: $Date: 2007/03/19 16:12:46 $

The CVS decorators should not be enabled at start-up. Verify the label decorator preference page.

When sharing or checking out a project, the decorators will be enabled automatically.

Disabling after they have been enabled and restarting. The decorators should be disabled. Checkout should not enable them again.

Enable the decorations again, then disconnecting a project should clear the decorators on the project.

Customizations

Since: 3.1
Last Modified: $Date: 2007/03/19 16:12:46 $

You can customize the label decorations via the preference page. The customizations will take effect when apply is pressed. Resetting the defaults should work.

Since: 3.0 M8
Last Modified: $Date: 2007/03/19 16:12:46 $

CVS text label decorations should be visible in the CVS synchronize participants. We don't bother to show the images because the sync view already shows the state images. The labels should also update if the 'show change in label' preference is changed.

Also, in the CVS synchronize view the revisions shown are the - . So ensure that the correct remote is shown.

Ensure that when the local tag changes the decorators in the sync view and navigator get updated.

Ensure that there is no flicker in packages view when cvs decorator updated on commit, update.

Watch/Edit

Basic scenarios

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

To setup, goto the CVS preference page and enable watch edit for all projects checked out from CVS. And then set the prompt option to always prompt.

1. Check out a project from CVS and verify that the files are marked as read-only.
2. Open a file and edit it. You should be prompted to edit it. Say yes. There should be a brief pause, then you can edit the file.
3. Open another file and start editing it. You should be prompted to edit it. Say no. The file will remain read-only and you won't be allowed to edit it.
4. Open a file and edit it. Say yes to the prompt. commit the file and edit again. You should be prompted a second time.
5. Open a file and edit it. Say yes to the prompt. Replace the file from the repository and edit again. You should be prompted to edit again.
6. Open a file and edit it. Un-plug your network connection. Say yes to the prompt to send a notification. There should be a pause, then the file should be editable.
7. Checkout another copy of the project. Edit a file, then try to edit the same file in the another project copy. You should be notified that the file is currently being edited by someone else.

Saving files - setup is the same as previous

1. Check out a project from CVS and verify that the files are marked as read-only.
2. Open a file and edit it. You should be prompted to edit it. Say yes. There should be a brief pause, then you can edit the file.
3. Edit the file but don't save it.
4. Edit the file in a system editor outside of Eclipse, then in the resource navigator, commit the file. The resource's decorator will change. Ignore all the prompts about saving the un-saved file.
5. Return to the unsaved editor and try typing. You should be prompted to call validate edit again.

validateEdit fails

1. Check out a project from CVS and verify that the files are marked as read-only.
2. Disconnect from network so that the validateEdit would fail.
3. Open a file and edit it. You should be prompted to edit it. Say yes. There should be a pause then the error should be reported in the editor pane showing the exception that occured.

Refactoring

1. Check out a project from CVS and verify that the files are marked as read-only.

Editors View

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Test that you can properly show the editors on a file.

Performance

Timings

Since: 3.0
Last Modified: $Date: 2007/03/19 16:12:46 $

Overview

1. Checkout
2. Synchronizing
3. Updating

Setup

• The Progress view in verbose mode can add 20% or more to times. In regular mode, it can still add a bit to the time. For these timings, the view was open but hidden.
• The Console view can add as much as 20% to times. For these tests, the console was turned off entirely.
• Running an eclipse operation several times will "warm-up" the code path due to JIT. The timings for Eclipse were usually the secodn or third timing obtained.

Checkout

• Eclipse 3.0 over pserver: 3:00 to 3:30 (several timings)
  • Timings increased slightly with progress view visible and considerably with progress view in verbose mode.
• CLI over pserver: 3:00 (1 timing)

Synchronize

Synchronize with no changes

• Eclipse 3.0 over pserver: 0:45
• CLI over pserver: 0:42 ("cvs -n update")

Synchronize with all outgoing, no incoming

• Eclipse 3.0 over pserver: 1:00
• CLI over pserver: 2:20 ("cvs -n update")

Synchronize with incoming changes

• Eclipse 3.0 over pserver: 0:55
• CLI over pserver: 0:45 ("cvs -n update")

Update

Update with no changes

• Eclipse 3.0 over pserver: 1:15, 1:25 (2 timings)
• CLI over pserver: 1:15 ("cvs update")

Update with all false outgoing changes (using touch)

• Eclipse 3.0 over pserver: 2:20
• CLI over pserver: 2:20

Update with incoming changes

• Eclipse 3.0 over pserver: 1:55
• CLI over pserver: 1:55 ("cvs -n update")

Resource Data Structures

Since: 3.0
Last Modified: $Date: 2007/03/19 16:12:46 $

CVS Workspace Sync info caches

1. Install the Core Spy Tools
2. Launch Eclipse
3. Checkout several projects
4. Open the Element Tree Spy to get the memory footprint. At the time of writting, CVS is the main user of these structures. In future test, ensure that others are not contributing to the tally.
5. Disconnect all the projects
6. The Element Tree Spy memory footprint should be reduced accordingly

Total resource count: 89,466
	Team private: 10,186
	Phantom: 4,055
	Markers: 0
	SyncInfo: 10,432
Number of layers: 15
Number of nodes: 89,514
Number of non-identical strings: 48,456
Total memory used by nodes: 23,141,343
	Nodes and ResourceInfo: 8,586,108
	Strings: 3,584,724
	Markers: 0
	Sync info: 1,447,861
	Session properties: 9,522,650
		class [B: 2,618,076
		class [Ljava.lang.Object;: 2,564,448
		class org.eclipse.core.internal.utils.ObjectMap: 1,700,240
		class [C: 1,454,994
		class java.lang.Long: 610,800
		class java.lang.String: 286,580
		class org.eclipse.team.internal.ccvs.core.syncinfo.FolderSyncInfo: 285,292
		class java.util.ArrayList: 768
		class org.eclipse.team.internal.ccvs.core.util.StringMatcher: 660
		class org.eclipse.team.internal.ccvs.core.util.FileNameMatcher: 320
		class [Ljava.lang.String;: 300
		class org.eclipse.core.runtime.QualifiedName: 160
		class java.lang.Object: 12
The top 20 equal but non-identical strings are:
	A.java->2,002
	in->1,219
	plugin.xml->913
	out->794
	A_out.java->489
	A_in.java->487
	eclipse->431
	org->421
	Test.java->412
	B.java->345
	build.properties->297
	I.java->269
	internal->256
	about.html->253
	plugin.properties->243
	.cvsignore->227
	.classpath->209
	ui->185
	src->184
	package.html->165

CVS Merge memory usage

1. Checkout one or more projects
2. Open the Element Tree Spy to get the memory footprint.
3. Perform a merge
4. Open the Element Tree Spy to get the memory footprint. The only increase should be in the synchronizer.
5. Remove the merge from the sync view
6. The Element Tree Spy memory footprint should be reduced accordingly

Looking For Leaks

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Removing synchronize view entries

1. Start with an empty synchronize view
2. Create an entry in the Synchronize view for each of the following cases:
   • Team>Synchronize
   • Compare with>Branch or Version
   • Team>Merge
3. Open the context menu
4. Select all mode and layout combinations
5. Remove the entry (making the sync view empty).
6. Select an item in another view
7. Using a memory profiler, look for instances of the following classes:
   • ISynchronizeParticipant
   • SynchronizeModelElement
   • SyncInfo/SyncInfoSet

Closing the Synchronize view

Team Data Structures

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

• Resource Variant cache
• SubsciberParticipant/SyncInfoSet

CVS Specific data structures

• Console (caches contents while not visible)
• Resource History View log entry cache
• Commit Sets log entry cache

Scalability

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

1. load org.eclipse.jdt.core.tests.model from dev.eclipse.org
2. Disconnect Formatter folder and delete it
3. Synchronize and the contents show up as incoming additions
4. Peform an Update in the project in the sync view.

Failure Cases

Connections

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Test that authentication, connection errors result in appropriate error messages and that these don't pollute the log file or console. to setup for these tests ensure there are a couple of shared projects in your workspace.

• Clear you log file before starting the tests and turn on the CVS quick diff provider.
• Perform an update, a synchronize, and open a file. The log should be empty and the operations should succeed.
• Disconnect from the network.
• Open a file. The CVS quick diff will fail and an error should be in the log.
• Synchronize all the shared projects. One error explaining the failures should be returned.
• Change the connection properties of one of the projects to point to an non-existing location. Then synchronize again, the error message should indicate that some succeeded and others failed. But the user should no that the operation did complete and skipped the failed projects.
• Expand the invalid location in the CVS repositories view. An appropriate error should be shown.

Authentication Problems

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

Test the error reporting when authentication fails due to either, invalid username, password, hostname. This should be tried with each CVS connection method: pserver, extssh, ext.

Misc

CVS Console

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

These are:

• font: changing the font should immediately update the sync view as well as all other views decorated by CVS (ie. Package Explorer).
• font color: message color, error color, command line. Changing these should immediatly update the console view.

Encoding Support

Since: 3.0 M9
Last Modified: $Date: 2007/03/19 16:12:46 $

Password Management

Since: 3.0 M9
Last Modified: $Date: 2007/03/19 16:12:46 $

Password Management

EXT

Since: 2.0
Last Modified: $Date: 2007/03/19 16:12:46 $

Ext connection method

Key Bindings

Since: 3.1
Last Modified: $Date: 2007/03/19 16:12:46 $

Activate the CVS menu and assign keybindings to the various CVS commands. Ensure that they work as expected.

Validate Edit

Editing Files

Since:
Last Modified: $Date: 2007/03/19 16:12:46 $

These tests are to sanity check editors behavior relating to calling validateEdit. The tests will try to cover all cases where files are changed by the validateEdit handler and changes are made to the read-only bit.

These test cases outline the expected behavior of single file editors in terms of calling validateEdit and handling of error conditions. All scenarios assume that a repository provider is mapped to a project and has created a sandbox with files that are marked read-only.

The following scenarios are stated in terms of the Navigator view and JDT. Other tools should translate them to a set of scenarios that make sense for the tool.

S1: Search and Replace

1. Select one or more projects or folders and choose Search/File.
2. Enter a string known to exist in multiple files and click Replace
3. Enter a new string that differs from the one searched for.

S2: Single file content modification

1. Open a Java file that is read-only
2. Perform any of the Java Source operations (e.g. toggle comment)
3. Ensure that validate edit is invoked

S3: Multiple file content modification

1. Ensure all files in your workspace are read-only
2. Perform a Java/Refactoring such as a method or class rename.
3. Ensure that validate edit is invoked at most once per project involved.

Logical Resource Support

Java Packages

Since: 3.1
Last Modified: $Date: 2007/03/19 16:12:46 $

Since: 3.1
Last Modified: $Date: 2007/03/19 16:12:46 $

Configure the Java Packages Explorer to show Working Sets. Populate the working sets with various combinations of shared and unshared projects and ensure that CVS operations can be performed directly on the working sets if they contain at least one shared project.