Project - License Info Usages

SW360 “Generate License Info” Page Test Cases

Test Case ID: PROJ-LI-AU-001
Description: Verify that the page shown when the “Generate License Info” button is clicked in the “License Clearing Tab” is similar to the Attachment Usages page.
Steps:
1. Navigate to the “License Clearing Tab” in a project.
2. Click on the “Generate License Info” button.
Expected Result: A page similar to the Attachment Usages page is shown.

Test Case ID: PROJ-LI-AU-002
Description: Verify the presence of the “Download” button and the “Show All” or “Only Approved” toggle on top. The “Only Approved” toggle should show only approved CLI attachments.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the top section of the page.
3. Click on the “Only Approved” toggle.
Expected Result: The “Download” button and toggles are present. The “Only Approved” toggle shows only approved CLI attachments.

Test Case ID: PROJ-LI-AU-003
Description: Verify the display of the selection restore message.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the message section.
Expected Result: The selection restore message is displayed.

Test Case ID: PROJ-LI-AU-013
Description: Verify CLI selection for project obligations, clearing reports, and adding license information to linked releases.
Steps:
1. Attach approved and non-approved CLI XML files to a linked release.
2. Select a non-approved CLI in the project’s Attachment Usage and verify that it takes priority in Obligations tab.
3. Select multiple CLI files in Attachment Usage and verify in the Obligations tab that the selected set is retained with an ambiguity warning, even if only one file is approved.
4. Clear the CLI usage selection and verify that approved CLI files are used in Obligations tab. Multiple approved files must produce an ambiguity warning without falling back.
5. With no CLI usage selection and no approved CLI, verify that available CLI files are used and multiple files produce an ambiguity warning.
Expected Result: Only an empty candidate tier permits fallback: Attachment Usage, then approved CLI, then any CLI. Non-CLI and stale attachment IDs do not count as CLI candidates. Report obligation mapping and linked-release license updates retain their single-candidate requirement and skip ambiguous releases.

Test Case ID: PROJ-LI-AU-004
Description: Verify the presence of the specified columns in the License Info Table.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the License Info Table.
3. Verify the presence of the following columns:
  - Checkbox (clicking will uncheck all checkboxes (except self) and restore selection at page load)
  - Lvl (starts at 1, increases at each subproject)
  - Name
  - Conclusions
  - Type
  - State
  - Uploaded by
  - Clearing Team
Expected Result: All specified columns are present and function as described.

Test Case ID: PROJ-LI-AU-005
Description: Verify the row colors based on the number of attachments.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the License Info Table.
3. Verify the row colors:
  - Red for no attachments
  - Green for 1 attachment
  - Yellow for more than 1 attachment
Expected Result: The row colors are displayed as specified.

Test Case ID: PROJ-LI-AU-006
Description: Verify that the State column displays the Release’s clearing state.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the License Info Table.
Expected Result: The State column displays the Release’s clearing state.

Test Case ID: PROJ-LI-AU-007
Description: Verify the details displayed for each attachment row.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the License Info Table.
3. Click on an attachment row to expand it.
4. Verify the presence of the following details:
  - Checkbox if License Info is selected for the attachment
  - Level number
  - If file ends with .rdf and concluded license is enabled, a checkbox for that
  - If used in number of projects else show “Not used in any projects yet” in the Type column
  - Attachment status
  - Uploader name
  - Uploader Department
Expected Result: All specified details are present and function as described.

Test Case ID: PROJ-LI-AU-008
Description: Verify the details displayed when an attachment is expanded.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the License Info Table.
3. Click on an attachment row to expand it.
4. Verify the presence of the following details:
  - Lvl
  - Name of license
  - License text from the CLI
5. Click on a license name to verify the checkbox behavior.
Expected Result: The specified details are present and function as described. Clicking on a license name enables the checkbox of the attachment, and individual licenses can be excluded.

Test Case ID: PROJ-LI-AU-009
Description: Verify the presence of the “Use selection of this subproject” button and the warning next to it. Clicking this button should import the usage for the subproject.
Steps:
1. Navigate to the “Generate License Info” page.
2. Locate the subproject section.
3. Click on the “Use selection of this subproject” button.
Expected Result: The button and warning are present. Clicking the button imports the usage for the subproject.

Test Case ID: PROJ-LI-AU-010
Description: Verify that clicking the “Download” button shows a report generation options popup. Clicking “Download” on the popup triggers the report and also saves the attachment usage of the current page.
Steps:
1. Navigate to the “Generate License Info” page.
2. Click on the “Download” button.
3. Verify the report generation options popup.
4. Click on the “Download” button in the popup.
Expected Result: The report generation options popup is shown. Clicking “Download” in the popup triggers the report and saves the attachment usage of the current page.