Eclipse 4diac Logo design once use everywhere Open Source PLC Framework for
Industrial Automation & Control

Documentation

MQTT with Eclipse Paho

MQTT with Eclipse Paho

This section will show you how to make applications communicate using MQTT Paho. 4DIAC uses a layered communication architecture. For MQTT Paho, a bottom layer has been realized, connecting MQTT Paho and the FBDK layer. Please consider that with the current implementation it is not possible to connect to more than one MQTT Paho broker on one Device.

Since you need MQTT Paho, you need to install the libraries in your computer. Therefore you need to download the code and compile it. You will need the same tools needed for FORTE (git, cmake, compilers). The process is based on the normal compilation of FORTE, but the MQTT feature is enabled. Here's a quick link to FORTE's compilation. For the installation please follow the next steps:

  1. Checkout and build MQTT Paho (if you are using Windows, some commands might change):
    $ git clone https://github.com/eclipse/paho.mqtt.c.git $ cd paho.mqtt.c
  2. Use CMake to generate the files to compile in a similar way you would use for compiling FORTE. The options in CMake for Paho are less and easy to understand. You will export the files to [binPaho]. Then do

    $ cd [binPaho] $ make
  3. Configure FORTE compilation files by starting CMake as you usually and follow the next steps:
    1. Check FORTE_COM_PAHOMQTT in CMake
    2. Set FORTE_COM_PAHOMQTT_INCLUDE_DIR in CMake to the folder where the header files of Paho are.
    3. Verify that the library specified in FORTE_COM_PAHOMQTT_LIB has the same name as the one you compiled. If not, change it.
    4. Set FORTE_COM_PAHOMQTT_LIB_DIR to the folder where FORTE_COM_PAHOMQTT_LIB is located.
    5. Configure CMake until nothing is marked red afterwards generate with CMake.
    6. Build forte
  4. In case you use MQTT Paho on a Virtual Machine use NAT and configure forwarding for port 1883, which is the default port on a MQTT Paho broker. IP addresses for the forwarding can be empty.
  5. To communicate with MQTT Paho use the Publish/Subscribe Function Blocks of 4DIAC and configure its ID data input as follows:
    raw[].mqtt[tcp://ip:port, cientID, topic]
    Example of MQTT

    Attention: When using the raw[] layer in your ID, the RD_1 of your subscriber and the SD_1 of your publishers must be connected to a STRING type data. Also, you can only use PUBLISHER_1 and SUSBCRIBER_1, not others function blocks wit more inputs or outputs.

    The main reason for this additional "raw" parameter is that mqtt does not define a payload format. With the additional param you specify in 4diac a so called communication layer to be used on top of MQTT. This communication layer is now in charge of taking the data from IEC 61499 and generate an according payload format or take the payload and transform it for the FB's outputs. The raw-layer is just accepting strings and sends the raw string content.

Where to go from here?

Go back to Protocols index:

Communication Index

If you want to go back to the Start Here page, we leave you here a fast access

Start Here page

Or Go to top